merge dev

* cargo fmt

* deps: bump clap to 4.6.0

* deps: cargo update

* Fix daemon autostart issue caused by sync pipewire retry loop (#43) (#44)

At boot time, PipeWire takes some time to register the `pwsp-daemon` and `pwsp-virtual-mic` devices. Previously, the daemon's retry loop for `link_player_to_virtual_mic()` was synchronous and limited to 5 attempts (1.5 seconds total). This caused systemd autostarts to fail with a code 1 if the devices were not yet available.

This change replaces the synchronous wait with an asynchronous `tokio::spawn` task. It will retry the link attempt up to 60 times with a 1-second delay without blocking the startup of the rest of the daemon. This prevents it from exiting abruptly during autostart.

Co-authored-by: google-labs-jules[bot] <161369871+google-labs-jules[bot]@users.noreply.github.com>

* deps: bump egui & eframe version to 0.34.1

* feat: replaced App::update with new App::logic and App::ui

* deps: bump egui_material_icons to 0.6.0

* deps: bump egui_dnd to 0.15.0

* fix: use .codepoint for icons

* refactor

* refactor: replaced deprecated CentralPanel::show with CentralPanel::show_inside

* refactor

* change version to 1.6.3

* update rust toolchain in github actions

* update freedesktop platform version to 25.08 for flaptak

* update github actions for flatpak builds

* add flatpak-builder installation inside actions

* add flathub configuration to actions

* add --user flag to flathub configuration

* remove sudo from flatpak actions

* Fix/dev flatpak actions 6082245116761610541 (#47)

* remove sudo

* remove steps

---------

Co-authored-by: google-labs-jules[bot] <161369871+google-labs-jules[bot]@users.noreply.github.com>

.github/FUNDING.yml

@@ -0,0 +1 @@
+custom: ['https://boosty.to/arabian']

.github/workflows/build.yml

@@ -0,0 +1,119 @@
+name: Build
+
+permissions:
+  contents: write
+  packages: write
+
+on:
+  push:
+    branches: [main, master]
+  pull_request:
+    branches: [main, master]
+  workflow_dispatch:
+
+jobs:
+  linux-build:
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Install apt deps (jq/zip + dev-libs)
+        run: |
+          sudo apt-get update
+          sudo apt-get install -y \
+            zip jq \
+            libpipewire-0.3-dev \
+            libclang-dev \
+            libasound2-dev
+
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
+
+      - name: Setup Rust toolchain
+        uses: actions-rs/toolchain@v1
+        with:
+          toolchain: 1.94.1
+
+      - name: Extract all binary names
+        id: cargo-meta
+        run: |
+          set -euo pipefail
+          BIN_NAMES=$(cargo metadata --no-deps --format-version 1 \
+            | jq -r '.packages[0].targets[] | select(.kind[] | contains("bin")) | .name')
+          echo "bin_names<<EOF" >> $GITHUB_OUTPUT
+          echo "$BIN_NAMES" >> $GITHUB_OUTPUT
+          echo "EOF" >> $GITHUB_OUTPUT
+
+      - name: Build all release binaries
+        run: cargo build --release --locked
+
+      - name: Package all binaries into one archive
+        shell: bash
+        run: |
+          set -euo pipefail
+          COMMIT_SHA="${{ github.sha }}"
+          ARCHIVE_NAME="pwsp-${COMMIT_SHA}-linux-x64.zip"
+          echo "Creating archive: $ARCHIVE_NAME"
+
+          FILES=()
+          while IFS= read -r BIN; do
+            [ -z "$BIN" ] && continue
+            FILES+=("target/release/$BIN")
+          done <<< "${{ steps.cargo-meta.outputs.bin_names }}"
+
+          if [ "${#FILES[@]}" -eq 0 ]; then
+            echo "Error: no binaries were discovered via cargo metadata." >&2
+            exit 1
+          fi
+
+          for f in "${FILES[@]}"; do
+            if [ ! -f "$f" ]; then
+              echo "Error: expected binary not found: $f" >&2
+              exit 1
+            fi
+            echo "Will add: $f"
+          done
+
+          zip -j "$ARCHIVE_NAME" "${FILES[@]}"
+
+      - name: Upload archive as artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: archive
+          path: pwsp-*.zip
+          retention-days: 7
+
+      - name: Install cargo-deb and create .deb
+        shell: bash
+        run: |
+          set -euo pipefail
+          cargo install --locked cargo-deb
+          export PATH="$HOME/.cargo/bin:$PATH"
+
+          cargo-deb
+
+      - name: Upload .deb(s) as artifacts
+        uses: actions/upload-artifact@v4
+        with:
+          name: deb-packages
+          path: target/debian/*.deb
+          retention-days: 7
+
+  flatpak-build:
+    runs-on: ubuntu-latest
+    container:
+      image: ghcr.io/flathub-infra/flatpak-github-actions:freedesktop-25.08
+      options: --privileged
+
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Build Flatpak
+        uses: flatpak/flatpak-github-actions/flatpak-builder@v6
+        with:
+          bundle: ru.arabianq.pwsp.flatpak
+          manifest-path: packages/flatpak/ru.arabianq.pwsp.yaml
+          cache: true
+          branch: master
+          build-bundle: true

.github/workflows/release-deb.yml

@@ -1,102 +0,0 @@
-name: Release deb
-
-permissions:
-  contents: write
-  packages: write
-
-on:
-  release:
-    types: [created]
-  workflow_dispatch:
-    inputs:
-      tag:
-        description: 'Tag to attach assets to (e.g. v1.0.0)'
-        required: false
-
-jobs:
-  build-and-release:
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Install apt deps (jq/zip + dev-libs)
-        run: |
-          sudo apt-get update
-          sudo apt-get install -y \
-            zip jq \
-            libpipewire-0.3-dev \
-            libclang-dev \
-            libasound2-dev
-
-      - name: Determine tag to use
-        id: tag
-        run: |
-          set -euo pipefail
-
-          INPUT_TAG="${{ github.event.inputs.tag || '' }}"
-          if [ -n "$INPUT_TAG" ]; then
-            echo "Using input tag: $INPUT_TAG"
-            echo "tag=$INPUT_TAG" >> $GITHUB_OUTPUT
-            exit 0
-          fi
-
-          EVENT_TAG="${{ github.event.release.tag_name || '' }}"
-          if [ -n "$EVENT_TAG" ]; then
-            echo "Using event tag: $EVENT_TAG"
-            echo "tag=$EVENT_TAG" >> $GITHUB_OUTPUT
-            exit 0
-          fi
-
-          if [[ "${GITHUB_REF:-}" =~ ^refs/tags/(.+)$ ]]; then
-            echo "Using GITHUB_REF tag: ${BASH_REMATCH[1]}"
-            echo "tag=${BASH_REMATCH[1]}" >> $GITHUB_OUTPUT
-            exit 0
-          fi
-
-          echo "No tag in input/event/GITHUB_REF — querying latest release via API..."
-          LATEST_JSON=$(curl -sSf -H "Authorization: Bearer $GITHUB_TOKEN" -H "Accept: application/vnd.github+json" "https://api.github.com/repos/${{ github.repository }}/releases/latest" || true)
-          TAG_NAME=$(echo "$LATEST_JSON" | jq -r '.tag_name // empty')
-          if [ -n "$TAG_NAME" ]; then
-            echo "Found latest release tag: $TAG_NAME"
-            echo "tag=$TAG_NAME" >> $GITHUB_OUTPUT
-            exit 0
-          fi
-
-          echo "No tag found"
-          echo "tag=" >> $GITHUB_OUTPUT
-
-      - name: Fail if no tag determined
-        if: ${{ steps.tag.outputs.tag == '' }}
-        run: |
-          echo "ERROR: No tag determined. Provide a tag when running manually or ensure a release exists."
-          exit 1
-
-      - name: Checkout code at tag
-        uses: actions/checkout@v4
-        with:
-          ref: ${{ steps.tag.outputs.tag || github.ref }}
-          fetch-depth: 0
-
-      - name: Setup Rust toolchain
-        uses: actions-rs/toolchain@v1
-        with:
-          toolchain: stable
-
-      - name: Build all release binaries
-        run: cargo build --release --locked
-
-      - name: Install cargo-deb and create .deb
-        shell: bash
-        run: |
-          set -euo pipefail
-          cargo install --locked cargo-deb
-          export PATH="$HOME/.cargo/bin:$PATH"
-
-          cargo-deb
-
-      - name: Upload .deb(s) to release
-        uses: softprops/action-gh-release@v2
-        with:
-          token: ${{ secrets.GITHUB_TOKEN }}
-          tag_name: ${{ steps.tag.outputs.tag }}
-          files: |
-            target/debian/*.deb

.github/workflows/release.yml

@@ -1,4 +1,4 @@
-name: Release archive
+name: Release
 
 permissions:
   contents: write
@@ -10,29 +10,20 @@ on:
   workflow_dispatch:
     inputs:
       tag:
-        description: 'Tag to attach assets to (e.g. v1.0.0)'
+        description: "Tag to attach assets to (e.g. v1.0.0)"
         required: false
 
 jobs:
-  build-and-release:
+  prepare:
     runs-on: ubuntu-latest
-
+    outputs:
+      tag: ${{ steps.tag.outputs.tag }}
     steps:
-      - name: Install apt deps (jq/zip + dev-libs)
-        run: |
-          sudo apt-get update
-          sudo apt-get install -y \
-            zip jq \
-            libpipewire-0.3-dev \
-            libclang-dev \
-            libasound2-dev
-
       - name: Determine tag to use
         id: tag
         run: |
           set -euo pipefail
 
-          # приоритет 1: входной параметр workflow_dispatch
           INPUT_TAG="${{ github.event.inputs.tag || '' }}"
           if [ -n "$INPUT_TAG" ]; then
             echo "Using input tag: $INPUT_TAG"
@@ -40,7 +31,6 @@ jobs:
             exit 0
           fi
 
-          # приоритет 2: если запущено событием release
           EVENT_TAG="${{ github.event.release.tag_name || '' }}"
           if [ -n "$EVENT_TAG" ]; then
             echo "Using event tag: $EVENT_TAG"
@@ -48,16 +38,14 @@ jobs:
             exit 0
           fi
 
-          # приоритет 3: если GITHUB_REF — refs/tags/...
           if [[ "${GITHUB_REF:-}" =~ ^refs/tags/(.+)$ ]]; then
             echo "Using GITHUB_REF tag: ${BASH_REMATCH[1]}"
             echo "tag=${BASH_REMATCH[1]}" >> $GITHUB_OUTPUT
             exit 0
           fi
 
-          # приоритет 4: пробуем получить последний релиз через API
           echo "No tag in input/event/GITHUB_REF — querying latest release via API..."
-          LATEST_JSON=$(curl -sSf -H "Authorization: Bearer $GITHUB_TOKEN" -H "Accept: application/vnd.github+json" "https://api.github.com/repos/${{ github.repository }}/releases/latest" || true)
+          LATEST_JSON=$(curl -sSf -H "Authorization: Bearer ${{ secrets.GITHUB_TOKEN }}" -H "Accept: application/vnd.github+json" "https://api.github.com/repos/${{ github.repository }}/releases/latest" || true)
           TAG_NAME=$(echo "$LATEST_JSON" | jq -r '.tag_name // empty')
           if [ -n "$TAG_NAME" ]; then
             echo "Found latest release tag: $TAG_NAME"
@@ -74,16 +62,30 @@ jobs:
           echo "ERROR: No tag determined. Provide a tag when running manually or ensure a release exists."
           exit 1
 
+  linux-release:
+    needs: prepare
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Install apt deps (jq/zip + dev-libs)
+        run: |
+          sudo apt-get update
+          sudo apt-get install -y \
+            zip jq \
+            libpipewire-0.3-dev \
+            libclang-dev \
+            libasound2-dev
+
       - name: Checkout code at tag
         uses: actions/checkout@v4
         with:
-          ref: ${{ steps.tag.outputs.tag || github.ref }}
+          ref: ${{ needs.prepare.outputs.tag }}
           fetch-depth: 0
 
       - name: Setup Rust toolchain
         uses: actions-rs/toolchain@v1
         with:
-          toolchain: stable
+          toolchain: 1.94.1
 
       - name: Extract all binary names
         id: cargo-meta
@@ -91,7 +93,6 @@ jobs:
           set -euo pipefail
           BIN_NAMES=$(cargo metadata --no-deps --format-version 1 \
             | jq -r '.packages[0].targets[] | select(.kind[] | contains("bin")) | .name')
-          # сохраним построчно в выход
           echo "bin_names<<EOF" >> $GITHUB_OUTPUT
           echo "$BIN_NAMES" >> $GITHUB_OUTPUT
           echo "EOF" >> $GITHUB_OUTPUT
@@ -103,11 +104,10 @@ jobs:
         shell: bash
         run: |
           set -euo pipefail
-          TAG="${{ steps.tag.outputs.tag }}"
+          TAG="${{ needs.prepare.outputs.tag }}"
           ARCHIVE_NAME="pwsp-${TAG}-linux-x64.zip"
           echo "Creating archive: $ARCHIVE_NAME"
 
-          # читаем построчно список бинарников и формируем массив файлов
           FILES=()
           while IFS= read -r BIN; do
             [ -z "$BIN" ] && continue
@@ -119,7 +119,6 @@ jobs:
             exit 1
           fi
 
-          # проверим, что все бинарники действительно есть
           for f in "${FILES[@]}"; do
             if [ ! -f "$f" ]; then
               echo "Error: expected binary not found: $f" >&2
@@ -128,13 +127,57 @@ jobs:
             echo "Will add: $f"
           done
 
-          # создаём архив с бинарниками внутри как просто pwsp-gui, pwsp-daemon, pwsp-cli
           zip -j "$ARCHIVE_NAME" "${FILES[@]}"
 
       - name: Upload release archive
         uses: softprops/action-gh-release@v2
         with:
           token: ${{ secrets.GITHUB_TOKEN }}
-          tag_name: ${{ steps.tag.outputs.tag }}
+          tag_name: ${{ needs.prepare.outputs.tag }}
           files: |
             pwsp-*.zip
+
+      - name: Install cargo-deb and create .deb
+        shell: bash
+        run: |
+          set -euo pipefail
+          cargo install --locked cargo-deb
+          export PATH="$HOME/.cargo/bin:$PATH"
+
+          cargo-deb
+
+      - name: Upload .deb(s) to release
+        uses: softprops/action-gh-release@v2
+        with:
+          token: ${{ secrets.GITHUB_TOKEN }}
+          tag_name: ${{ needs.prepare.outputs.tag }}
+          files: |
+            target/debian/*.deb
+
+  flatpak-release:
+    needs: prepare
+    runs-on: ubuntu-latest
+    container:
+      image: ghcr.io/flathub-infra/flatpak-github-actions:freedesktop-25.08
+      options: --privileged
+
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          ref: ${{ needs.prepare.outputs.tag }}
+        
+      - name: Build Flatpak
+        uses: flatpak/flatpak-github-actions/flatpak-builder@v6
+        with:
+          bundle: ru.arabianq.pwsp.flatpak
+          manifest-path: packages/flatpak/ru.arabianq.pwsp.yaml
+          cache: true
+          branch: master
+          build-bundle: true
+
+      - name: Upload Flatpak to release
+        uses: softprops/action-gh-release@v2
+        with:
+          token: ${{ secrets.GITHUB_TOKEN }}
+          tag_name: ${{ needs.prepare.outputs.tag }}
+          files: ru.arabianq.pwsp.flatpak

.gitignore

@@ -1,2 +1,4 @@
 /target
 .idea
+packages/aur/bin/.git
+packages/aur/standart/.git

Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "pwsp"
-version = "1.0.1"
+version = "1.6.3"
 edition = "2024"
 authors = ["arabian"]
 description = "PWSP lets you play audio files through your microphone. Has both CLI and GUI clients."
@@ -12,23 +12,45 @@ keywords = ["soundpad", "pipewire", "linux", "cli", "gui"]
 
 
 [dependencies]
-tokio = { version = "1.47.1", features = ["full"] }
-futures = { version = "0.3.31", features = ["thread-pool"] }
+tokio = { version = "1.50.0", features = ["full"] }
 async-trait = "0.1.89"
 
-serde = { version = "1.0.227", features = ["derive"] }
-serde_json = "1.0.145"
+serde = { version = "1.0.228", features = ["derive"] }
+serde_json = "1.0.149"
 
-clap = { version = "4.5.48", default-features = false, features = ["std", "suggestions", "help", "usage", "error-context", "derive"] }
+clap = { version = "4.6.0", default-features = false, features = [
+    "std",
+    "suggestions",
+    "help",
+    "usage",
+    "error-context",
+    "derive",
+] }
 dirs = "6.0.0"
+itertools = "0.14.0"
 
-rodio = { version = "0.21.1", default-features = false, features = ["symphonia-all", "playback"] }
+rodio = { version = "0.22.2", default-features = false, features = [
+    "symphonia-all",
+    "playback",
+] }
 pipewire = "0.9.2"
-rfd = "0.15.4"
+rfd = { version = "0.17.2", default-features = false, features = [
+    "xdg-portal",
+] }
+opener = { version = "0.8.4", features = ["reveal"] }
 
-egui = { version = "0.32.3", default-features = false, features = ["default_fonts", "rayon"] }
-eframe = { version = "0.32.3", default-features = false, features = ["default_fonts", "glow", "x11", "wayland"] }
-egui_material_icons = "0.4.0"
+egui = { version = "0.34.1", default-features = false, features = [
+    "default_fonts",
+    "rayon",
+] }
+eframe = { version = "0.34.1", default-features = false, features = [
+    "default_fonts",
+    "glow",
+    "x11",
+    "wayland",
+] }
+egui_material_icons = "0.6.0"
+egui_dnd = "0.15.0"
 
 [[bin]]
 name = "pwsp-daemon"
@@ -51,10 +73,34 @@ panic = "abort"
 
 [package.metadata.deb]
 assets = [
-    ["target/release/pwsp-daemon", "usr/bin/", "755"],
-    ["target/release/pwsp-cli", "usr/bin/", "755"],
-    ["target/release/pwsp-gui", "usr/bin/", "755"],
-    ["assets/pwsp-gui.desktop", "usr/share/applications/pwsp.desktop", "644"],
-    ["assets/icon.png", "usr/share/icons/hicolor/256x256/apps/pwsp.png", "644"],
-    ["assets/pwsp-daemon.service", "usr/lib/systemd/user/pwsp-daemon.service", "644"],
+    [
+        "target/release/pwsp-daemon",
+        "usr/bin/",
+        "755",
+    ],
+    [
+        "target/release/pwsp-cli",
+        "usr/bin/",
+        "755",
+    ],
+    [
+        "target/release/pwsp-gui",
+        "usr/bin/",
+        "755",
+    ],
+    [
+        "assets/pwsp-gui.desktop",
+        "usr/share/applications/pwsp.desktop",
+        "644",
+    ],
+    [
+        "assets/icon.png",
+        "usr/share/icons/hicolor/256x256/apps/pwsp.png",
+        "644",
+    ],
+    [
+        "assets/pwsp-daemon.service",
+        "usr/lib/systemd/user/pwsp-daemon.service",
+        "644",
+    ],
 ]

README.md

@@ -24,6 +24,9 @@ chats on platforms like **Discord, Zoom, or Teamspeak**.
     * **Position slider** to fast-forward or rewind the audio.
 * **Persistent Configuration**: The list of added directories and your selected audio output device are saved
   automatically, so you won't need to reconfigure them every time you launch the application.
+* **Collapsible Audio Tracks**: You can collapse every audio track to save space.
+* **Drag and Drop Directories**: Reorder your sound directories easily using drag and drop.
+* **Automatic Device Detection**: PWSP automatically detects when an input device is connected or disconnected and handles linking/unlinking.
 
 # **⚙️ How It Works**
 
@@ -35,8 +38,8 @@ three main components:
     * Creating and managing virtual audio devices.
     * Linking these devices within the PipeWire graph.
     * Handling all audio playback.
-* **pwsp-gui**: This is the graphical user interface. It acts as a client that communicates with pwsp-daemon via a *
-  *UnixSocket**. This is how you interact with your sound collection, control playback, and configure settings.
+* **pwsp-gui**: This is the graphical user interface. It acts as a client that communicates with pwsp-daemon via a
+  **UnixSocket**. This is how you interact with your sound collection, control playback, and configure settings.
 * **pwsp-cli**: This is the command-line interface, also acting as a client. It provides a way to control the daemon
   without a GUI, allowing for scripting or quick command-based actions.
 
@@ -44,10 +47,10 @@ three main components:
 
 ## **Pre-built Packages**
 
-You can download pre-built binaries, .deb and .rpm packages from
+You can download pre-built binaries and .deb packages from
 the [releases page](https://github.com/arabianq/pipewire-soundpad/releases).
 
-## **Fedora Linux**
+## **Fedora Linux (and derivatives)**
 
 If you're using Fedora, you can install PWSP from a dedicated repository using DNF.
 
@@ -73,7 +76,7 @@ sudo dnf install pwsp
 There is pwsp package in AUR.
 You can install it using yay, paru or any other AUR helper.
 ```bash
-paru pwsp
+paru pwsp-bin # or paru pwsp to build it locally
 ```
 
 ## **Installing using cargo**
@@ -137,12 +140,12 @@ You can start the daemon from the terminal or enable the systemd service for aut
 
 ### **Using the GUI**
 
-1. **Add Sounds**: Click the **"Add Directory"** button and select a folder containing your audio files. The application
+1. **Add Sounds**: Click the **"+"** button and select a folder containing your audio files. The application
    will automatically list all supported files.
-2. **Select Microphone**: In the main application window, select your **physical microphone**. PWSP will automatically
+2. **Select Microphone**: In the main application window, select your microphone. PWSP will automatically
    create a virtual microphone and feed it sound from two sources: **your microphone** and the **audio files**.
 3. **Playback**: Click on a file in the list to load it, then use the **"Play"** and **"Pause"** buttons to control
-   playback.
+   playback. You can also play single file once using **"Play File"** button.
 
 ### **Using the CLI**
 
@@ -173,6 +176,28 @@ pwsp-cli --help
       pwsp-cli set position 20
       ```
 
+### **Hotkeys & Controls**
+
+#### **Keyboard Shortcuts**
+
+| Key                      | Action                                               |
+| :----------------------- | :--------------------------------------------------- |
+| **Space**                | Pause / Resume audio                                 |
+| **Backspace**            | Stop all audio tracks                                |
+| **Enter**                | Play selected file (stops all other tracks)          |
+| **Ctrl + Enter**         | Add selected file to playback (plays simultaneously) |
+| **Shift + Enter**        | Replace the last added track with the selected one   |
+| **I**                    | Open / Close settings                                |
+| **/**                    | Focus search field                                   |
+| **Ctrl + ↑ / ↓**         | Navigate through files                               |
+| **Ctrl + Shift + ↑ / ↓** | Navigate through directories                         |
+
+#### **Mouse Controls**
+
+* **Left Click**: Play track (stops all other tracks).
+* **Ctrl + Left Click**: Add track (plays simultaneously with current tracks).
+* **Shift + Left Click**: Replace the last added track with the selected one.
+
 # **🤝 Contributing**
 
 Contributions are welcome\! If you have ideas for improvements or find a bug, feel free to create
@@ -183,3 +208,6 @@ a [pull request](https://github.com/arabianq/pipewire-soundpad/pulls).
 
 This project is licensed under
 the [MIT License](https://github.com/arabianq/pipewire-soundpad/blob/main/LICENSE).
+
+# **🤖 AI Wiki**
+[![Ask DeepWiki](https://deepwiki.com/badge.svg)](https://deepwiki.com/arabianq/pipewire-soundpad)

assets/pwsp-daemon.service

@@ -1,5 +1,6 @@
 [Unit]
 Description=Pipewire Soundpad Daemon
+After=pipewire.service
 
 [Service]
 ExecStart=/usr/bin/pwsp-daemon

packages/aur/bin/.SRCINFO

@@ -0,0 +1,17 @@
+pkgbase = pwsp-bin
+pkgdesc = Lets you play audio files through your microphone (Pre-built binaries)
+pkgver = 1.6.3
+pkgrel = 2
+url = https://github.com/arabianq/pipewire-soundpad
+arch = x86_64
+license = MIT
+depends = pipewire
+depends = alsa-lib
+provides = pwsp
+conflicts = pwsp
+source = pwsp-bin-1.6.3.zip :: https://github.com/arabianq/pipewire-soundpad/releases/download/v1.6.3/pwsp-v1.6.3-linux-x64.zip
+source = pipewire-soundpad-1.6.3.tar.gz :: https://github.com/arabianq/pipewire-soundpad/archive/refs/tags/v1.6.3.tar.gz
+sha256sums = SKIP
+sha256sums = SKIP
+
+pkgname = pwsp-bin

packages/aur/bin/.gitignore

@@ -0,0 +1,163 @@
+# Byte-compiled / optimized / DLL files
+__pycache__/
+*.py[cod]
+*$py.class
+
+# C extensions
+*.so
+
+# Distribution / packaging
+.Python
+build/
+develop-eggs/
+dist/
+downloads/
+eggs/
+.eggs/
+lib/
+lib64/
+parts/
+sdist/
+var/
+wheels/
+share/python-wheels/
+*.egg-info/
+.installed.cfg
+*.egg
+MANIFEST
+
+# PyInstaller
+#  Usually these files are written by a python script from a template
+#  before PyInstaller builds the exe, so as to inject date/other infos into it.
+*.manifest
+*.spec
+
+# Installer logs
+pip-log.txt
+pip-delete-this-directory.txt
+
+# Unit test / coverage reports
+htmlcov/
+.tox/
+.nox/
+.coverage
+.coverage.*
+.cache
+nosetests.xml
+coverage.xml
+*.cover
+*.py,cover
+.hypothesis/
+.pytest_cache/
+cover/
+
+# Translations
+*.mo
+*.pot
+
+# Django stuff:
+*.log
+local_settings.py
+db.sqlite3
+db.sqlite3-journal
+*.db
+# Flask stuff:
+instance/
+.webassets-cache
+
+# Scrapy stuff:
+.scrapy
+
+# Sphinx documentation
+docs/_build/
+
+# PyBuilder
+.pybuilder/
+target/
+
+# Jupyter Notebook
+.ipynb_checkpoints
+
+# IPython
+profile_default/
+ipython_config.py
+
+# pyenv
+#   For a library or package, you might want to ignore these files since the code is
+#   intended to run in multiple environments; otherwise, check them in:
+# .python-version
+
+# pipenv
+#   According to pypa/pipenv#598, it is recommended to include Pipfile.lock in version control.
+#   However, in case of collaboration, if having platform-specific dependencies or dependencies
+#   having no cross-platform support, pipenv may install dependencies that don't work, or not
+#   install all needed dependencies.
+#Pipfile.lock
+
+# poetry
+#   Similar to Pipfile.lock, it is generally recommended to include poetry.lock in version control.
+#   This is especially recommended for binary packages to ensure reproducibility, and is more
+#   commonly ignored for libraries.
+#   https://python-poetry.org/docs/basic-usage/#commit-your-poetrylock-file-to-version-control
+poetry.lock
+
+.poetry.lock
+
+# pdm
+#   Similar to Pipfile.lock, it is generally recommended to include pdm.lock in version control.
+#pdm.lock
+#   pdm stores project-wide configurations in .pdm.toml, but it is recommended to not include it
+#   in version control.
+#   https://pdm.fming.dev/#use-with-ide
+.pdm.toml
+
+# PEP 582; used by e.g. github.com/David-OConnor/pyflow and github.com/pdm-project/pdm
+__pypackages__/
+
+# Celery stuff
+celerybeat-schedule
+celerybeat.pid
+
+# SageMath parsed files
+*.sage.py
+
+# Environments
+.env
+.venv
+env/
+venv/
+ENV/
+env.bak/
+venv.bak/
+
+# Spyder project settings
+.spyderproject
+.spyproject
+
+# Rope project settings
+.ropeproject
+
+# mkdocs documentation
+/site
+
+# mypy
+.mypy_cache/
+.dmypy.json
+dmypy.json
+
+# Pyre type checker
+.pyre/
+
+# pytype static type analyzer
+.pytype/
+
+# Cython debug symbols
+cythikaaryhon_debug/
+
+# PyCharm
+#  JetBrains specific template is maintained in a separate JetBrains.gitignore that can
+#  be found at https://github.com/github/gitignore/blob/main/Global/JetBrains.gitignore
+#  and can be added to the global gitignore or merged into this file.  For a more nuclear
+#  option (not recommended) you can uncomment the following to ignore the entire idea folder.
+#.idea/
+#.vscode/

packages/aur/bin/PKGBUILD

@@ -0,0 +1,32 @@
+# Maintainer: Alexander Tarasov <a.tevg@ya.ru>
+pkgname=pwsp-bin
+_pkgname=pipewire-soundpad
+pkgver=1.6.3
+pkgrel=2
+pkgdesc="Lets you play audio files through your microphone (Pre-built binaries)"
+arch=('x86_64')
+url="https://github.com/arabianq/pipewire-soundpad"
+license=('MIT')
+depends=('pipewire' 'alsa-lib')
+provides=('pwsp')
+conflicts=('pwsp')
+
+source=("${pkgname}-${pkgver}.zip::https://github.com/arabianq/$_pkgname/releases/download/v$pkgver/pwsp-v$pkgver-linux-x64.zip"
+        "${_pkgname}-${pkgver}.tar.gz::https://github.com/arabianq/$_pkgname/archive/refs/tags/v$pkgver.tar.gz")
+
+sha256sums=('SKIP'
+            'SKIP')
+
+package() {
+  _srcsrc="${srcdir}/${_pkgname}-${pkgver}"
+
+  install -Dm755 "${srcdir}/pwsp-cli" "${pkgdir}/usr/bin/pwsp-cli"
+  install -Dm755 "${srcdir}/pwsp-daemon" "${pkgdir}/usr/bin/pwsp-daemon"
+  install -Dm755 "${srcdir}/pwsp-gui" "${pkgdir}/usr/bin/pwsp-gui"
+
+  install -Dm644 "$_srcsrc/assets/pwsp-gui.desktop" "${pkgdir}/usr/share/applications/pwsp-gui.desktop"
+  install -Dm644 "$_srcsrc/assets/icon.png" "${pkgdir}/usr/share/icons/hicolor/256x256/apps/icon.png"
+  install -Dm644 "$_srcsrc/assets/pwsp-daemon.service" "${pkgdir}/usr/lib/systemd/user/pwsp-daemon.service"
+  
+  install -Dm644 "$_srcsrc/LICENSE" "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
+}

packages/aur/standart/.SRCINFO

@@ -0,0 +1,16 @@
+pkgbase = pwsp
+	pkgdesc = Lets you play audio files through your microphone
+	pkgver = 1.6.3
+	pkgrel = 1
+	url = https://github.com/arabianq/pipewire-soundpad
+	arch = any
+	license = MIT
+	makedepends = clang
+	makedepends = rust
+	makedepends = cargo
+	makedepends = pipewire
+	makedepends = alsa-lib
+	source = https://github.com/arabianq/pipewire-soundpad/archive/refs/tags/v1.6.3.tar.gz
+	sha256sums = SKIP
+
+pkgname = pwsp

packages/aur/standart/.gitignore

@@ -0,0 +1,163 @@
+# Byte-compiled / optimized / DLL files
+__pycache__/
+*.py[cod]
+*$py.class
+
+# C extensions
+*.so
+
+# Distribution / packaging
+.Python
+build/
+develop-eggs/
+dist/
+downloads/
+eggs/
+.eggs/
+lib/
+lib64/
+parts/
+sdist/
+var/
+wheels/
+share/python-wheels/
+*.egg-info/
+.installed.cfg
+*.egg
+MANIFEST
+
+# PyInstaller
+#  Usually these files are written by a python script from a template
+#  before PyInstaller builds the exe, so as to inject date/other infos into it.
+*.manifest
+*.spec
+
+# Installer logs
+pip-log.txt
+pip-delete-this-directory.txt
+
+# Unit test / coverage reports
+htmlcov/
+.tox/
+.nox/
+.coverage
+.coverage.*
+.cache
+nosetests.xml
+coverage.xml
+*.cover
+*.py,cover
+.hypothesis/
+.pytest_cache/
+cover/
+
+# Translations
+*.mo
+*.pot
+
+# Django stuff:
+*.log
+local_settings.py
+db.sqlite3
+db.sqlite3-journal
+*.db
+# Flask stuff:
+instance/
+.webassets-cache
+
+# Scrapy stuff:
+.scrapy
+
+# Sphinx documentation
+docs/_build/
+
+# PyBuilder
+.pybuilder/
+target/
+
+# Jupyter Notebook
+.ipynb_checkpoints
+
+# IPython
+profile_default/
+ipython_config.py
+
+# pyenv
+#   For a library or package, you might want to ignore these files since the code is
+#   intended to run in multiple environments; otherwise, check them in:
+# .python-version
+
+# pipenv
+#   According to pypa/pipenv#598, it is recommended to include Pipfile.lock in version control.
+#   However, in case of collaboration, if having platform-specific dependencies or dependencies
+#   having no cross-platform support, pipenv may install dependencies that don't work, or not
+#   install all needed dependencies.
+#Pipfile.lock
+
+# poetry
+#   Similar to Pipfile.lock, it is generally recommended to include poetry.lock in version control.
+#   This is especially recommended for binary packages to ensure reproducibility, and is more
+#   commonly ignored for libraries.
+#   https://python-poetry.org/docs/basic-usage/#commit-your-poetrylock-file-to-version-control
+poetry.lock
+
+.poetry.lock
+
+# pdm
+#   Similar to Pipfile.lock, it is generally recommended to include pdm.lock in version control.
+#pdm.lock
+#   pdm stores project-wide configurations in .pdm.toml, but it is recommended to not include it
+#   in version control.
+#   https://pdm.fming.dev/#use-with-ide
+.pdm.toml
+
+# PEP 582; used by e.g. github.com/David-OConnor/pyflow and github.com/pdm-project/pdm
+__pypackages__/
+
+# Celery stuff
+celerybeat-schedule
+celerybeat.pid
+
+# SageMath parsed files
+*.sage.py
+
+# Environments
+.env
+.venv
+env/
+venv/
+ENV/
+env.bak/
+venv.bak/
+
+# Spyder project settings
+.spyderproject
+.spyproject
+
+# Rope project settings
+.ropeproject
+
+# mkdocs documentation
+/site
+
+# mypy
+.mypy_cache/
+.dmypy.json
+dmypy.json
+
+# Pyre type checker
+.pyre/
+
+# pytype static type analyzer
+.pytype/
+
+# Cython debug symbols
+cythikaaryhon_debug/
+
+# PyCharm
+#  JetBrains specific template is maintained in a separate JetBrains.gitignore that can
+#  be found at https://github.com/github/gitignore/blob/main/Global/JetBrains.gitignore
+#  and can be added to the global gitignore or merged into this file.  For a more nuclear
+#  option (not recommended) you can uncomment the following to ignore the entire idea folder.
+#.idea/
+#.vscode/

packages/aur/standart/PKGBUILD

@@ -0,0 +1,47 @@
+# Maintainer: Alexander Tarasov <a.tevg@ya.ru>
+pkgsubn=pwsp
+pkgname=pwsp
+pkgver=1.6.3
+pkgrel=1
+pkgdesc="Lets you play audio files through your microphone"
+arch=('any')
+url="https://github.com/arabianq/pipewire-soundpad"
+license=('MIT')
+makedepends=(clang rust cargo pipewire alsa-lib)
+source=("$url/archive/refs/tags/v$pkgver.tar.gz")
+sha256sums=('SKIP')
+
+
+prepare() {
+  cd "${srcdir}/pipewire-soundpad-${pkgver}"
+  
+  export CARGO_HOME="${srcdir}/${pkgname%}/.cargo"    # Download all to src directory, not in ~/.cargo
+
+  cargo fetch --locked --target "$(rustc -vV | sed -n 's/host: //p')"
+}
+
+build() {
+  cd "${srcdir}/pipewire-soundpad-${pkgver}"
+
+  export CARGO_ENCODED_RUSTFLAGS="--remap-path-prefix=${srcdir}=/"    # Prevent warning: 'Package contains reference to $srcdir'
+  [[ -n "${_sccache}" ]] && export RUSTC_WRAPPER=sccache  # If $_sccache not empty, build using binary cache
+
+  export CARGO_HOME="${srcdir}/${pkgname%}/.cargo"    # Use downloaded earlier from src directory, not from ~/.cargo
+  export CARGO_TARGET_DIR=target                        # Place the output in target relative to the current directory
+
+  cargo build --frozen --release
+}
+
+
+package() {
+  cd "${srcdir}/pipewire-soundpad-${pkgver}"
+  
+  install -Dm755 "target/release/pwsp-cli" "${pkgdir}/usr/bin/pwsp-cli"
+  install -Dm755 "target/release/pwsp-daemon" "${pkgdir}/usr/bin/pwsp-daemon"
+  install -Dm755 "target/release/pwsp-gui" "${pkgdir}/usr/bin/pwsp-gui"
+
+  install -Dm644 "assets/pwsp-gui.desktop" "${pkgdir}/usr/share/applications/pwsp-gui.desktop"
+  install -Dm644 "assets/icon.png" "${pkgdir}/usr/share/icons/hicolor/256x256/apps/icon.png"
+
+  install -Dm644 "assets/pwsp-daemon.service" "${pkgdir}/usr/lib/systemd/user/pwsp-daemon.service"
+}

packages/flatpak/pwsp-wrapper.py

@@ -0,0 +1,35 @@
+#!/usr/bin/env python3
+
+import argparse
+import subprocess
+
+if __name__ == "__main__":
+    parser = argparse.ArgumentParser(
+        prog="PWSP Flatpak",
+        add_help=True,
+        exit_on_error=True
+    )
+    subparsers = parser.add_subparsers(dest="command")
+
+    cli_parser = subparsers.add_parser("cli", add_help=False, prefix_chars=" ")
+    cli_parser.add_argument("args", nargs=argparse.REMAINDER, help="Arguments for pwsp-cli")
+
+    daemon_parser = subparsers.add_parser("daemon", add_help=True)
+    daemon_group = daemon_parser.add_mutually_exclusive_group(required=True)
+    daemon_group.add_argument("--start", action="store_true", help="Start pwps-daemon")
+    daemon_group.add_argument("--kill", action="store_true", help="Kill pwsp-daemon")
+
+    args = parser.parse_args()
+
+    command = args.command
+    if not command:
+        subprocess.Popen("pwsp-daemon")
+        subprocess.Popen("pwsp-gui")
+    else:
+        if command == "cli":
+            subprocess.Popen(["pwsp-cli"] + args.args)
+        elif command == "daemon":
+            if args.start:
+                subprocess.Popen("pwsp-daemon")
+            elif args.kill:
+                subprocess.Popen(["pwsp-cli", "action", "kill"])

packages/flatpak/ru.arabianq.pwsp.desktop

@@ -0,0 +1,9 @@
+[Desktop Entry]
+Name=PWSP (Soundpad)
+Comment=Let's you play audio files through you microphone
+Exec=pwsp-wrapper.py %u
+Icon=ru.arabianq.pwsp
+Terminal=false
+Type=Application
+Categories=Audio;Utility;
+Keywords=soundpad;pipewire;audio;

packages/flatpak/ru.arabianq.pwsp.metainfo.xml

@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<component type="desktop-application">
+    <id>ru.arabianq.pwsp</id>
+    <metadata_license>CC0-1.0</metadata_license>
+    <project_license>MIT</project_license>
+    <name>PWSP</name>
+    <summary>Play audio files through your microphone using PipeWire</summary>
+    <description>
+        <p>
+            PWSP (PipeWire Soundpad) is a tool that allows you to play audio files through your
+            microphone.
+            It features both a graphical user interface and a command-line interface.
+        </p>
+    </description>
+    <launchable type="desktop-id">ru.arabianq.pwsp.desktop</launchable>
+    <screenshots>
+        <screenshot type="default">
+            <image>
+                https://raw.githubusercontent.com/arabianq/pipewire-soundpad/master/assets/screenshot.png</image>
+        </screenshot>
+    </screenshots>
+    <url type="homepage">https://pwsp.arabianq.ru</url>
+    <developer_name>arabian</developer_name>
+    <content_rating type="oars-1.1" />
+</component>

packages/flatpak/ru.arabianq.pwsp.yaml

@@ -0,0 +1,47 @@
+app-id: ru.arabianq.pwsp
+runtime: org.freedesktop.Platform
+runtime-version: "25.08"
+sdk: org.freedesktop.Sdk
+sdk-extensions:
+  - org.freedesktop.Sdk.Extension.rust-stable
+  - org.freedesktop.Sdk.Extension.llvm20
+command: pwsp-wrapper.py
+finish-args:
+  - --share=ipc
+  - --socket=fallback-x11
+  - --socket=wayland
+  - --socket=pulseaudio
+  - --filesystem=xdg-run/pipewire-0
+  - --filesystem=xdg-run/pwsp:create
+  - --filesystem=xdg-run/app/ru.arabianq.pwsp:create
+  - --filesystem=host
+  - --device=all
+  - --device=dri
+  - --share=network
+  - --talk-name=org.freedesktop.portal.Desktop
+  - --talk-name=org.freedesktop.portal.Documents
+
+build-options:
+  append-path: /usr/lib/sdk/rust-stable/bin:/usr/lib/sdk/llvm20/bin
+  env:
+    CARGO_HOME: /run/build/pwsp/cargo
+    LIBCLANG_PATH: /usr/lib/sdk/llvm20/lib
+
+modules:
+  - name: pwsp
+    buildsystem: simple
+    build-options:
+      build-args:
+        - --share=network
+    build-commands:
+      - cargo build --release
+      - install -Dm755 target/release/pwsp-daemon /app/bin/pwsp-daemon
+      - install -Dm755 target/release/pwsp-cli /app/bin/pwsp-cli
+      - install -Dm755 target/release/pwsp-gui /app/bin/pwsp-gui
+      - install -Dm755 packages/flatpak/pwsp-wrapper.py /app/bin/pwsp-wrapper.py
+      - install -Dm644 assets/icon.png /app/share/icons/hicolor/256x256/apps/ru.arabianq.pwsp.png
+      - install -Dm644 packages/flatpak/ru.arabianq.pwsp.desktop /app/share/applications/ru.arabianq.pwsp.desktop
+      - install -Dm644 packages/flatpak/ru.arabianq.pwsp.metainfo.xml /app/share/metainfo/ru.arabianq.pwsp.metainfo.xml
+    sources:
+      - type: dir
+        path: ../../

packages/rpm/pwsp.spec

@@ -4,7 +4,7 @@
 %global cargo_install_lib 0
 
 Name:            pwsp
-Version:         1.0.1
+Version:         1.6.3
 Release:         %autorelease
 Summary:         Lets you play audio files through your microphone
 
@@ -26,7 +26,7 @@ GUI clients.}
 %description %{_description}
 
 %prep
-%autosetup -n pipewire-soundpad-v%{version} -p1
+%autosetup -n pipewire-soundpad-%{version} -p1
 
 %build
 cargo build --release --locked

src/bin/cli.rs

@@ -14,17 +14,17 @@ struct Cli {
 
 #[derive(Subcommand, Debug)]
 enum Commands {
-    /// Perform an action (ping, pause, resume, stop, play)
+    /// Perform an action (ping, pause, resume, toggle-pause, stop, play)
     Action {
         #[clap(subcommand)]
         action: Actions,
     },
-    /// Get information from the player (is paused, volume, position, state)
+    /// Get information from the player (is paused, volume, position, duration, state, current-file-path, input, inputs)
     Get {
         #[clap(subcommand)]
         parameter: GetCommands,
     },
-    /// Set information in the player (volume, position)
+    /// Set information in the player (volume, position, input)
     Set {
         #[clap(subcommand)]
         parameter: SetCommands,
@@ -35,14 +35,39 @@ enum Commands {
 enum Actions {
     /// Ping the daemon
     Ping,
+    /// Kill the daemon
+    Kill,
     /// Pause audio playback
-    Pause,
+    Pause {
+        #[clap(short, long)]
+        id: Option<u32>,
+    },
     /// Resume audio playback
-    Resume,
+    Resume {
+        #[clap(short, long)]
+        id: Option<u32>,
+    },
+    /// Toggle pause
+    TogglePause {
+        #[clap(short, long)]
+        id: Option<u32>,
+    },
     /// Stop audio playback and clear the queue
-    Stop,
+    Stop {
+        #[clap(short, long)]
+        id: Option<u32>,
+    },
     /// Play a file
-    Play { file_path: PathBuf },
+    Play {
+        file_path: PathBuf,
+        #[clap(short, long)]
+        concurrent: bool,
+    },
+    /// Toggle loop
+    ToggleLoop {
+        #[clap(short, long)]
+        id: Option<u32>,
+    },
 }
 
 #[derive(Subcommand, Debug)]
@@ -50,29 +75,56 @@ enum GetCommands {
     /// Check if the player is paused
     IsPaused,
     /// Playback volume
-    Volume,
-    /// Playback position
-    Position,
+    Volume {
+        #[clap(short, long)]
+        id: Option<u32>,
+    },
+    /// Playback position (in seconds)
+    Position {
+        #[clap(short, long)]
+        id: Option<u32>,
+    },
     /// Duration of the current file
-    Duration,
-    /// Player state
+    Duration {
+        #[clap(short, long)]
+        id: Option<u32>,
+    },
+    /// Player state (Playing, Paused or Stopped)
     State,
-    /// Current playing file path
-    CurrentFilePath,
+    /// Get all playing tracks
+    Tracks,
     /// Current audio input
     Input,
     /// All audio inputs
     Inputs,
+    /// Version of the daemon
+    DaemonVersion,
+    /// Full player state
+    FullState,
 }
 
 #[derive(Subcommand, Debug)]
 enum SetCommands {
     /// Playback volume
-    Volume { volume: f32 },
-    /// Playback position
-    Position { position: f32 },
-    /// Input
-    Input { id: u32 },
+    Volume {
+        volume: f32,
+        #[clap(short, long)]
+        id: Option<u32>,
+    },
+    /// Playback position (in seconds)
+    Position {
+        position: f32,
+        #[clap(short, long)]
+        id: Option<u32>,
+    },
+    /// Audio input id (see pwsp-cli get inputs)
+    Input { name: String },
+    /// Enable or disable loop (true or false)
+    Loop {
+        enabled: String,
+        #[clap(short, long)]
+        id: Option<u32>,
+    },
 }
 
 #[tokio::main]
@@ -84,29 +136,40 @@ async fn main() -> Result<(), Box<dyn Error>> {
     let request = match cli.command {
         Commands::Action { action } => match action {
             Actions::Ping => Request::ping(),
-            Actions::Pause => Request::pause(),
-            Actions::Resume => Request::resume(),
-            Actions::Stop => Request::stop(),
-            Actions::Play { file_path } => Request::play(file_path.to_str().unwrap()),
+            Actions::Kill => Request::kill(),
+            Actions::Pause { id } => Request::pause(id),
+            Actions::Resume { id } => Request::resume(id),
+            Actions::TogglePause { id } => Request::toggle_pause(id),
+            Actions::Stop { id } => Request::stop(id),
+            Actions::Play {
+                file_path,
+                concurrent,
+            } => Request::play(&file_path.to_string_lossy(), concurrent),
+            Actions::ToggleLoop { id } => Request::toggle_loop(id),
         },
         Commands::Get { parameter } => match parameter {
             GetCommands::IsPaused => Request::get_is_paused(),
-            GetCommands::Volume => Request::get_volume(),
-            GetCommands::Position => Request::get_position(),
-            GetCommands::Duration => Request::get_duration(),
+            GetCommands::Volume { id } => Request::get_volume(id),
+            GetCommands::Position { id } => Request::get_position(id),
+            GetCommands::Duration { id } => Request::get_duration(id),
             GetCommands::State => Request::get_state(),
-            GetCommands::CurrentFilePath => Request::get_current_file_path(),
+            GetCommands::Tracks => Request::get_tracks(),
             GetCommands::Input => Request::get_input(),
             GetCommands::Inputs => Request::get_inputs(),
+            GetCommands::DaemonVersion => Request::get_daemon_version(),
+            GetCommands::FullState => Request::get_full_state(),
         },
         Commands::Set { parameter } => match parameter {
-            SetCommands::Volume { volume } => Request::set_volume(volume),
-            SetCommands::Position { position } => Request::seek(position),
-            SetCommands::Input { id } => Request::set_input(id),
+            SetCommands::Volume { volume, id } => Request::set_volume(volume, id),
+            SetCommands::Position { position, id } => Request::seek(position, id),
+            SetCommands::Input { name } => Request::set_input(&name),
+            SetCommands::Loop { enabled, id } => Request::set_loop(&enabled, id),
         },
     };
 
-    let response = make_request(request).await?;
+    let response = make_request(request)
+        .await
+        .map_err(|e| e as Box<dyn Error>)?;
     println!("{} : {}", response.status, response.message);
 
     Ok(())

src/bin/daemon.rs

@@ -9,10 +9,12 @@ use pwsp::{
         pipewire::create_virtual_mic,
     },
 };
-use std::{error::Error, fs};
+use std::os::unix::fs::PermissionsExt;
+use std::{error::Error, fs, time::Duration};
 use tokio::{
     io::{AsyncReadExt, AsyncWriteExt},
     net::UnixListener,
+    time::sleep,
 };
 
 #[tokio::main]
@@ -25,8 +27,24 @@ async fn main() -> Result<(), Box<dyn Error>> {
 
     get_daemon_config(); // Initialize daemon config
     create_virtual_mic()?;
-    get_audio_player().await; // Initialize audio player
-    link_player_to_virtual_mic().await?;
+    if let Err(err) = get_audio_player().await {
+        eprintln!("Failed to initialize audio player: {}", err);
+    } // Initialize audio player
+
+    tokio::spawn(async {
+        let max_retries = 60;
+        for i in 0..=max_retries {
+            match link_player_to_virtual_mic().await {
+                Ok(_) => {
+                    println!("Successfully linked player to virtual mic.");
+                    break;
+                }
+                Err(e) => println!("{e}\t{i}/{max_retries}"),
+            }
+
+            sleep(Duration::from_millis(1000)).await;
+        }
+    });
 
     let runtime_dir = get_runtime_dir();
 
@@ -34,16 +52,41 @@ async fn main() -> Result<(), Box<dyn Error>> {
     lock_file.lock()?;
 
     let socket_path = runtime_dir.join("daemon.sock");
-    if fs::metadata(&socket_path).is_ok() {
-        fs::remove_file(&socket_path)?;
+    if let Err(e) = fs::remove_file(&socket_path) {
+        if e.kind() != std::io::ErrorKind::NotFound {
+            return Err(e.into());
+        }
     }
 
     let listener = UnixListener::bind(&socket_path)?;
+    fs::set_permissions(&socket_path, fs::Permissions::from_mode(0o600))?;
+
     println!(
         "Daemon started. Listening on {}",
         socket_path.to_str().unwrap_or_default()
     );
 
+    let commands_loop_handle = tokio::spawn(async {
+        commands_loop(listener).await.ok();
+    });
+
+    let player_loop_handle = tokio::spawn(async {
+        player_loop().await;
+    });
+
+    tokio::select! {
+        _ = commands_loop_handle => {
+            eprint!("Commands loop was finished, stopping program...");
+        }
+        _ = player_loop_handle => {
+            eprint!("Audio Player loop was finished, stopping program...");
+        }
+    }
+
+    Ok(())
+}
+
+async fn commands_loop(listener: UnixListener) -> Result<(), Box<dyn Error>> {
     loop {
         let (mut stream, _addr) = listener.accept().await?;
 
@@ -57,14 +100,35 @@ async fn main() -> Result<(), Box<dyn Error>> {
 
             let request_len = u32::from_le_bytes(len_bytes) as usize;
 
+            if request_len > 10 * 1024 * 1024 {
+                eprintln!(
+                    "Failed to read message from client: request too large ({} bytes)!",
+                    request_len
+                );
+                return;
+            }
+
             let mut buffer = vec![0u8; request_len];
             if stream.read_exact(&mut buffer).await.is_err() {
                 eprintln!("Failed to read message from client!");
                 return;
             }
 
-            let request: Request = serde_json::from_slice(&buffer).unwrap();
-            println!("Received request: {:?}", request);
+            let request: Request = match serde_json::from_slice(&buffer) {
+                Ok(req) => req,
+                Err(err) => {
+                    let response =
+                        Response::new(false, format!("Failed to parse request: {}", err));
+                    let response_data = match serde_json::to_vec(&response) {
+                        Ok(data) => data,
+                        Err(_) => return, // Should not happen with this simple Response
+                    };
+                    let response_len = response_data.len() as u32;
+                    let _ = stream.write_all(&response_len.to_le_bytes()).await;
+                    let _ = stream.write_all(&response_data).await;
+                    return;
+                }
+            };
             // ---------- Read request (end) ----------
 
             // ---------- Generate response (start) ----------
@@ -78,7 +142,13 @@ async fn main() -> Result<(), Box<dyn Error>> {
             // ---------- Generate response (end) ----------
 
             // ---------- Send response (start) ----------
-            let response_data = serde_json::to_vec(&response).unwrap();
+            let response_data = match serde_json::to_vec(&response) {
+                Ok(data) => data,
+                Err(err) => {
+                    eprintln!("Failed to serialize response: {}", err);
+                    return;
+                }
+            };
             let response_len = response_data.len() as u32;
 
             if stream.write_all(&response_len.to_le_bytes()).await.is_err() {
@@ -89,8 +159,29 @@ async fn main() -> Result<(), Box<dyn Error>> {
                 eprintln!("Failed to write response to client!");
                 return;
             }
-            println!("Sent response: {:?}", response);
             // ---------- Send response (end) ----------
+
+            if response.status && response.message.eq("killed") {
+                std::process::exit(0);
+            }
         });
     }
 }
+
+async fn player_loop() {
+    loop {
+        match get_audio_player().await {
+            Ok(player_mutex) => {
+                let mut audio_player = player_mutex.lock().await;
+                audio_player.update().await;
+            }
+            Err(_err) => {
+                // To avoid spamming logs every 100ms when audio player fails to init
+                // we can just sleep, or you might prefer to print the error.
+                // Assuming it failed to initialize, no player update is possible.
+            }
+        }
+
+        sleep(Duration::from_millis(100)).await;
+    }
+}

src/gui/draw.rs

@@ -1,14 +1,34 @@
 use crate::gui::SoundpadGui;
 use egui::{
-    AtomExt, Button, Color32, ComboBox, FontFamily, Label, RichText, ScrollArea, Slider, TextEdit,
-    Ui, Vec2,
+    Align, AtomExt, Button, CollapsingHeader, Color32, ComboBox, CursorIcon, FontFamily, Label,
+    Layout, RichText, ScrollArea, Sense, Slider, TextEdit, Ui, Vec2,
 };
-use egui_material_icons::icons;
-use pwsp::types::audio_player::PlayerState;
+use egui_dnd::dnd;
+use egui_material_icons::icons::*;
+use pwsp::types::{audio_player::TrackInfo, gui::AppState};
 use pwsp::utils::gui::format_time_pair;
-use std::{error::Error, path::PathBuf};
+use std::{error::Error, time::Instant};
+
+enum TrackAction {
+    Pause(u32),
+    Resume(u32),
+    ToggleLoop(u32),
+    Stop(u32),
+}
 
 impl SoundpadGui {
+    fn get_volume_icon(volume: f32) -> &'static str {
+        if volume > 0.7 {
+            ICON_VOLUME_UP.codepoint
+        } else if volume <= 0.0 {
+            ICON_VOLUME_OFF.codepoint
+        } else if volume < 0.3 {
+            ICON_VOLUME_MUTE.codepoint
+        } else {
+            ICON_VOLUME_DOWN.codepoint
+        }
+    }
+
     pub fn draw_waiting_for_daemon(&mut self, ui: &mut Ui) {
         ui.centered_and_justified(|ui| {
             ui.label(
@@ -24,7 +44,7 @@ impl SoundpadGui {
             ui.spacing_mut().item_spacing.y = 5.0;
             // --------- Back Button and Title ----------
             ui.horizontal_top(|ui| {
-                let back_button = Button::new(icons::ICON_ARROW_BACK).frame(false);
+                let back_button = Button::new(ICON_ARROW_BACK).frame(false);
                 let back_button_response = ui.add(back_button);
                 if back_button_response.clicked() {
                     self.app_state.show_settings = false;
@@ -48,14 +68,23 @@ impl SoundpadGui {
                 &mut self.config.save_scale_factor,
                 "Always remember UI scale factor",
             );
+            let pause_on_exit_response = ui.checkbox(
+                &mut self.config.pause_on_exit,
+                "Pause audio playback when the window is closed",
+            );
 
             if save_volume_response.changed()
                 || save_input_response.changed()
                 || save_scale_response.changed()
+                || pause_on_exit_response.changed()
             {
                 self.config.save_to_file().ok();
             }
             // --------------------------------
+
+            ui.with_layout(Layout::bottom_up(Align::Min), |ui| {
+                ui.label(format!("GUI version: {}", env!("CARGO_PKG_VERSION")));
+            });
         });
     }
 
@@ -69,107 +98,201 @@ impl SoundpadGui {
 
     fn draw_header(&mut self, ui: &mut Ui) {
         ui.vertical_centered_justified(|ui| {
-            // Current file name
-            ui.label(
-                RichText::new(
-                    self.audio_player_state
-                        .current_file_path
-                        .file_stem()
-                        .unwrap_or_default()
-                        .to_str()
-                        .unwrap_or_default(),
+            if self.audio_player_state.tracks.is_empty() {
+                ui.label("No tracks playing");
+                return;
+            }
+
+            let tracks = self.audio_player_state.tracks.clone();
+            let mut action = None;
+
+            for track in tracks {
+                CollapsingHeader::new(
+                    RichText::new(
+                        track
+                            .path
+                            .file_stem()
+                            .unwrap_or_default()
+                            .to_str()
+                            .unwrap_or_default(),
+                    )
+                    .color(Color32::WHITE)
+                    .family(FontFamily::Monospace),
                 )
-                .color(Color32::WHITE)
-                .family(FontFamily::Monospace),
-            );
-            // Media controls
-            self.draw_controls(ui);
-            ui.separator();
+                .default_open(true)
+                .show(ui, |ui| {
+                    if let Some(act) = Self::draw_track_control(ui, &mut self.app_state, &track) {
+                        action = Some(act);
+                    }
+                });
+                ui.separator();
+            }
+
+            if let Some(action) = action {
+                match action {
+                    TrackAction::Pause(id) => self.pause(Some(id)),
+                    TrackAction::Resume(id) => self.resume(Some(id)),
+                    TrackAction::ToggleLoop(id) => self.toggle_loop(Some(id)),
+                    TrackAction::Stop(id) => self.stop(Some(id)),
+                }
+            }
         });
     }
 
-    fn draw_controls(&mut self, ui: &mut Ui) {
+    fn draw_track_control(
+        ui: &mut Ui,
+        app_state: &mut AppState,
+        track: &TrackInfo,
+    ) -> Option<TrackAction> {
+        let ui_state = app_state.track_ui_states.entry(track.id).or_default();
+
+        let should_update_position = !ui_state.position_dragged
+            && ui_state
+                .ignore_position_update_until
+                .map(|t| Instant::now() > t)
+                .unwrap_or(true);
+
+        if should_update_position {
+            ui_state.position_slider_value = track.position;
+        }
+
+        let should_update_volume = !ui_state.volume_dragged
+            && ui_state
+                .ignore_volume_update_until
+                .map(|t| Instant::now() > t)
+                .unwrap_or(true);
+
+        if should_update_volume {
+            ui_state.volume_slider_value = track.volume;
+        }
+
+        let mut action = None;
+
         ui.horizontal_top(|ui| {
             // ---------- Play Button ----------
-            let play_button = Button::new(match self.audio_player_state.state {
-                PlayerState::Playing => icons::ICON_PAUSE,
-                PlayerState::Paused | PlayerState::Stopped => icons::ICON_PLAY_ARROW,
+            let play_button = Button::new(if track.paused {
+                ICON_PLAY_ARROW
+            } else {
+                ICON_PAUSE
             })
             .corner_radius(15.0);
 
             let play_button_response = ui.add_sized([30.0, 30.0], play_button);
             if play_button_response.clicked() {
-                self.play_toggle();
+                if track.paused {
+                    action = Some(TrackAction::Resume(track.id));
+                } else {
+                    action = Some(TrackAction::Pause(track.id));
+                }
+            }
+            // --------------------------------
+
+            // ---------- Loop Button ----------
+            let loop_button = Button::new(
+                RichText::new(if track.looped {
+                    ICON_REPEAT_ONE
+                } else {
+                    ICON_REPEAT
+                })
+                .size(18.0),
+            )
+            .frame(false);
+
+            let loop_button_response = ui.add_sized([15.0, 30.0], loop_button);
+            if loop_button_response.clicked() {
+                action = Some(TrackAction::ToggleLoop(track.id));
             }
             // --------------------------------
 
             // ---------- Position Slider ----------
-            let position_slider = Slider::new(
-                &mut self.app_state.position_slider_value,
-                0.0..=self.audio_player_state.duration,
-            )
-            .show_value(false)
-            .step_by(1.0);
+            let duration = track.duration.unwrap_or(1.0);
+            let position_slider = Slider::new(&mut ui_state.position_slider_value, 0.0..=duration)
+                .show_value(false)
+                .step_by(0.01);
 
             let default_slider_width = ui.spacing().slider_width;
             let position_slider_width = ui.available_width()
                 - (30.0 * 3.0)
                 - default_slider_width
-                - (ui.spacing().item_spacing.x * 5.0);
+                - (ui.spacing().item_spacing.x * 6.0);
             ui.spacing_mut().slider_width = position_slider_width;
             let position_slider_response = ui.add_sized([30.0, 30.0], position_slider);
             if position_slider_response.drag_stopped() {
-                self.app_state.position_dragged = true;
+                ui_state.position_dragged = true;
             }
             // --------------------------------
 
             // ---------- Time Label ----------
-            let time_label = Label::new(
-                RichText::new(format_time_pair(
-                    self.audio_player_state.position,
-                    self.audio_player_state.duration,
-                ))
-                .monospace(),
-            );
+            let time_label =
+                Label::new(RichText::new(format_time_pair(track.position, duration)).monospace());
             ui.add_sized([30.0, 30.0], time_label);
             // --------------------------------
 
             // ---------- Volume Icon ----------
-            let volume_icon = if self.audio_player_state.volume > 0.7 {
-                icons::ICON_VOLUME_UP
-            } else if self.audio_player_state.volume == 0.0 {
-                icons::ICON_VOLUME_OFF
-            } else if self.audio_player_state.volume < 0.3 {
-                icons::ICON_VOLUME_MUTE
-            } else {
-                icons::ICON_VOLUME_DOWN
-            };
-            let volume_icon = Label::new(RichText::new(volume_icon).size(18.0));
-            ui.add_sized([30.0, 25.0], volume_icon);
+            let volume_icon = Self::get_volume_icon(track.volume);
+            let volume_label = Label::new(RichText::new(volume_icon).size(18.0));
+            ui.add_sized([30.0, 30.0], volume_label)
+                .on_hover_text(format!("Volume: {:.0}%", track.volume * 100.0));
             // --------------------------------
 
             // ---------- Volume Slider ----------
-            let volume_slider = Slider::new(&mut self.app_state.volume_slider_value, 0.0..=1.0)
+            let volume_slider = Slider::new(&mut ui_state.volume_slider_value, 0.0..=1.0)
                 .show_value(false)
                 .step_by(0.01);
 
-            ui.spacing_mut().slider_width = default_slider_width;
+            ui.spacing_mut().slider_width = default_slider_width - 30.0;
             ui.spacing_mut().item_spacing.x = 0.0;
 
             let volume_slider_response = ui.add_sized([30.0, 30.0], volume_slider);
             if volume_slider_response.drag_stopped() {
-                self.app_state.volume_dragged = true;
+                ui_state.volume_dragged = true;
+            }
+            // --------------------------------
+
+            // ---------- Stop Button ---------
+            let stop_button = Button::new(ICON_CLOSE).frame(false);
+            let stop_button_response = ui.add_sized([30.0, 30.0], stop_button);
+            if stop_button_response.clicked() {
+                action = Some(TrackAction::Stop(track.id));
             }
             // --------------------------------
         });
+
+        action
     }
 
     fn draw_body(&mut self, ui: &mut Ui) {
-        let dirs_size = Vec2::new(ui.available_width() / 4.0, ui.available_height() - 40.0);
+        let left_panel_width = self
+            .config
+            .left_panel_width
+            .max(100.0)
+            .min(ui.available_width() - 100.0);
+        let dirs_size = Vec2::new(left_panel_width, ui.available_height() - 40.0);
 
         ui.horizontal(|ui| {
             self.draw_dirs(ui, dirs_size);
-            ui.separator();
+
+            let (rect, response) = ui.allocate_at_least(
+                Vec2::new(ui.spacing().item_spacing.x, ui.available_height()),
+                Sense::click_and_drag(),
+            );
+
+            if ui.is_rect_visible(rect) {
+                let stroke = ui.visuals().widgets.noninteractive.bg_stroke;
+                ui.painter().vline(rect.center().x, rect.y_range(), stroke);
+            }
+
+            let vertical_separator_response =
+                response.on_hover_and_drag_cursor(CursorIcon::ResizeHorizontal);
+
+            if vertical_separator_response.dragged() {
+                self.config.left_panel_width += vertical_separator_response.drag_delta().x;
+                self.config.left_panel_width = self.config.left_panel_width.clamp(100.0, 500.0);
+            }
+
+            if vertical_separator_response.drag_stopped() {
+                self.config.save_to_file().ok();
+            }
 
             let files_size = Vec2::new(ui.available_width(), ui.available_height() - 40.0);
             self.draw_files(ui, files_size);
@@ -182,37 +305,90 @@ impl SoundpadGui {
             ui.set_min_height(area_size.y);
 
             ScrollArea::vertical().id_salt(0).show(ui, |ui| {
-                let mut dirs: Vec<PathBuf> = self.app_state.dirs.iter().cloned().collect();
-                dirs.sort();
-                for path in dirs.iter() {
+                ui.set_min_width(area_size.x);
+
+                let mut dirs = self.app_state.dirs.clone();
+
+                dnd(ui, "dnd_directories").show_vec(&mut dirs, |ui, item, handle, _state| {
+                    let path = item.clone();
                     ui.horizontal(|ui| {
+                        handle.ui(ui, |ui| {
+                            ui.label(ICON_DRAG_INDICATOR.codepoint);
+                        });
                         let name = path
                             .file_name()
                             .map(|s| s.to_string_lossy().to_string())
                             .unwrap_or_else(|| path.to_string_lossy().to_string());
 
-                        let dir_button =
-                            Button::new(RichText::new(name).atom_max_width(area_size.x))
-                                .frame(false);
-                        let dir_button_response = ui.add(dir_button);
-                        if dir_button_response.clicked() {
-                            self.app_state.current_dir = Some(path.clone());
+                        let mut dir_button_text = RichText::new(name.clone());
+                        if let Some(current_dir) = &self.app_state.current_dir {
+                            if current_dir.eq(&path) {
+                                dir_button_text = dir_button_text.color(Color32::WHITE);
+                            }
                         }
 
-                        let delete_dir_button = Button::new(icons::ICON_DELETE).frame(false);
+                        let dir_button =
+                            Button::new(dir_button_text.atom_max_width(area_size.x)).frame(false);
+
+                        let dir_button_response = ui.add(dir_button);
+                        if dir_button_response.clicked() {
+                            self.open_dir(&path);
+                        }
+
+                        let delete_dir_button = Button::new(ICON_DELETE).frame(false);
                         let delete_dir_button_response =
                             ui.add_sized([18.0, 18.0], delete_dir_button);
                         if delete_dir_button_response.clicked() {
-                            self.remove_dir(path.clone());
+                            self.app_state.dirs_to_remove.insert(path.clone());
                         }
+
+                        // Context menu
+                        dir_button_response.context_menu(|ui| {
+                            if ui
+                                .button(format!("{} {}", ICON_OPEN_IN_NEW.codepoint, "Show"))
+                                .clicked()
+                            {
+                                self.open_dir(&path);
+                            }
+
+                            if ui
+                                .button(format!(
+                                    "{} {}",
+                                    ICON_OPEN_IN_BROWSER.codepoint, "Open in File Manager"
+                                ))
+                                .clicked()
+                            {
+                                if let Err(e) = opener::open(&path) {
+                                    eprintln!("Failed to open file manager: {}", e);
+                                }
+                            }
+
+                            ui.separator();
+
+                            if ui
+                                .button(format!("{} {}", ICON_DELETE.codepoint, "Remove"))
+                                .clicked()
+                            {
+                                self.app_state.dirs_to_remove.insert(path.clone());
+                            }
+                        });
                     });
-                }
+                });
+                self.app_state.dirs = dirs;
 
                 ui.horizontal(|ui| {
-                    let add_dir_button = egui::Button::new(icons::ICON_ADD).frame(false);
-                    let add_dir_button_response = ui.add_sized([18.0, 18.0], add_dir_button);
-                    if add_dir_button_response.clicked() {
-                        self.add_dir();
+                    let add_dirs_button = Button::new(ICON_ADD).frame(false);
+                    let add_dirs_button_response = ui.add_sized([18.0, 18.0], add_dirs_button);
+                    if add_dirs_button_response.clicked() {
+                        self.add_dirs();
+                    }
+                });
+
+                ui.with_layout(Layout::bottom_up(Align::Min), |ui| {
+                    let play_file_button = Button::new("Play file");
+                    let play_file_button_response = ui.add(play_file_button);
+                    if play_file_button_response.clicked() {
+                        self.open_file();
                     }
                 });
             });
@@ -220,16 +396,19 @@ impl SoundpadGui {
     }
 
     fn draw_files(&mut self, ui: &mut Ui, area_size: Vec2) {
-        let extensions = [
-            "mp3", "wav", "ogg", "flac", "mp4", "m4a", "aac", "mov", "mkv", "webm", "avi",
-        ];
-
         ui.vertical(|ui| {
             ui.horizontal(|ui| {
-                ui.add_sized(
+                let search_field_response = ui.add_sized(
                     [ui.available_width(), 22.0],
                     TextEdit::singleline(&mut self.app_state.search_query).hint_text("Search..."),
                 );
+
+                if self.app_state.force_focus_search {
+                    search_field_response.request_focus();
+                    self.app_state.force_focus_search = false;
+                }
+
+                self.app_state.search_field_id = Some(search_field_response.id);
             });
 
             ui.separator();
@@ -239,44 +418,82 @@ impl SoundpadGui {
                 ui.set_min_height(area_size.y);
 
                 ui.vertical(|ui| {
-                    if let Some(path) = self.app_state.current_dir.clone() {
-                        for entry in path.read_dir().unwrap() {
-                            let entry = entry.unwrap();
-                            let entry_path = entry.path();
+                    let files = self.get_filtered_files();
 
-                            if entry_path.is_dir() {
-                                continue;
-                            }
+                    for entry_path in files {
+                        let file_name = entry_path
+                            .file_name()
+                            .unwrap()
+                            .to_string_lossy()
+                            .to_string();
 
-                            if !extensions.contains(
-                                &entry_path.extension().unwrap_or_default().to_str().unwrap(),
-                            ) {
-                                continue;
-                            }
-
-                            let file_name = entry_path
-                                .file_name()
-                                .unwrap()
-                                .to_string_lossy()
-                                .to_string();
-
-                            let search_query = self
-                                .app_state
-                                .search_query
-                                .to_lowercase()
-                                .trim()
-                                .to_string();
-
-                            if !file_name.to_lowercase().contains(search_query.as_str()) {
-                                continue;
-                            }
-
-                            let file_button = Button::new(file_name).frame(false);
-                            let file_button_response = ui.add(file_button);
-                            if file_button_response.clicked() {
-                                self.play_file(entry_path);
+                        let mut file_button_text = RichText::new(file_name);
+                        if let Some(current_file) = &self.app_state.selected_file {
+                            if current_file.eq(&entry_path) {
+                                file_button_text = file_button_text.color(Color32::WHITE);
                             }
                         }
+
+                        let file_button = Button::new(file_button_text).frame(false);
+                        let file_button_response = ui.add(file_button);
+                        if file_button_response.clicked() {
+                            ui.input(|i| {
+                                if i.modifiers.ctrl {
+                                    self.play_file(&entry_path, true);
+                                } else if i.modifiers.shift
+                                    && let Some(last_track) = self.audio_player_state.tracks.last()
+                                {
+                                    self.stop(Some(last_track.id));
+                                    self.play_file(&entry_path, true);
+                                } else {
+                                    self.play_file(&entry_path, false);
+                                }
+                            });
+                            self.app_state.selected_file = Some(entry_path.clone());
+                        }
+
+                        // Context menu
+                        file_button_response.context_menu(|ui| {
+                            if ui
+                                .button(format!("{} {}", ICON_BOLT.codepoint, "Play Solo"))
+                                .clicked()
+                            {
+                                self.play_file(&entry_path, false);
+                                self.app_state.selected_file = Some(entry_path.clone());
+                            }
+
+                            if ui
+                                .button(format!("{} {}", ICON_ADD.codepoint, "Add New"))
+                                .clicked()
+                            {
+                                self.play_file(&entry_path, true);
+                                self.app_state.selected_file = Some(entry_path.clone());
+                            }
+
+                            if ui
+                                .button(format!("{} {}", ICON_SWAP_HORIZ.codepoint, "Replace Last"))
+                                .clicked()
+                                && let Some(last_track) = self.audio_player_state.tracks.last()
+                            {
+                                self.stop(Some(last_track.id));
+                                self.play_file(&entry_path, true);
+                                self.app_state.selected_file = Some(entry_path.clone());
+                            }
+
+                            ui.separator();
+
+                            if ui
+                                .button(format!(
+                                    "{} {}",
+                                    ICON_OPEN_IN_BROWSER.codepoint, "Show in File Manager"
+                                ))
+                                .clicked()
+                            {
+                                if let Err(e) = opener::reveal(&entry_path) {
+                                    eprintln!("Failed to open file manager: {}", e);
+                                }
+                            }
+                        });
                     }
                 });
             });
@@ -285,15 +502,14 @@ impl SoundpadGui {
 
     fn draw_footer(&mut self, ui: &mut Ui) {
         ui.add_space(5.0);
-        ui.horizontal_top(|ui| {
+        ui.horizontal(|ui| {
             // ---------- Microphone selection ----------
-            let mut mics: Vec<(&u32, &String)> =
-                self.audio_player_state.all_inputs.iter().collect();
-            mics.sort_by_key(|(k, _)| *k);
+            let mics = &self.audio_player_state.all_inputs_sorted;
 
             let mut selected_input = self.audio_player_state.current_input.to_owned();
             let prev_input = selected_input.to_owned();
             ComboBox::from_label("Choose microphone")
+                .height(30.0)
                 .selected_text(
                     self.audio_player_state
                         .all_inputs
@@ -301,8 +517,8 @@ impl SoundpadGui {
                         .unwrap_or(&String::new()),
                 )
                 .show_ui(ui, |ui| {
-                    for (index, device) in mics {
-                        ui.selectable_value(&mut selected_input, index.to_owned(), device);
+                    for (name, nick) in mics {
+                        ui.selectable_value(&mut selected_input, name.clone(), nick);
                     }
                 });
 
@@ -311,10 +527,40 @@ impl SoundpadGui {
             }
             // --------------------------------
 
+            // ---------- Master Volume Slider ----------
+            let volume_icon = Self::get_volume_icon(self.audio_player_state.volume);
+            let volume_label = Label::new(RichText::new(volume_icon).size(18.0));
+            ui.add_sized([18.0, 18.0], volume_label)
+                .on_hover_text(format!(
+                    "Master Volume: {:.0}%",
+                    self.audio_player_state.volume * 100.0
+                ));
+
+            let should_update_volume = !self.app_state.volume_dragged
+                && self
+                    .app_state
+                    .ignore_volume_update_until
+                    .map(|t| Instant::now() > t)
+                    .unwrap_or(true);
+
+            if should_update_volume {
+                self.app_state.volume_slider_value = self.audio_player_state.volume;
+            }
+
+            let volume_slider = Slider::new(&mut self.app_state.volume_slider_value, 0.0..=1.0)
+                .show_value(false)
+                .step_by(0.01);
+            let volume_slider_response = ui.add_sized([150.0, 18.0], volume_slider);
+            if volume_slider_response.drag_stopped() {
+                self.app_state.volume_dragged = true;
+            }
+            // ------------------------------------------
+
             ui.add_space(ui.available_width() - 18.0 - ui.spacing().item_spacing.x);
 
             // ---------- Settings button ----------
-            let settings_button = Button::new(icons::ICON_SETTINGS).frame(false);
+            let settings_button =
+                Button::new(ICON_SETTINGS.atom_size(Vec2::new(18.0, 18.0))).frame(false);
             let settings_button_response = ui.add_sized([18.0, 18.0], settings_button);
             if settings_button_response.clicked() {
                 self.app_state.show_settings = true;

src/gui/input.rs

@@ -1,24 +1,129 @@
 use crate::gui::SoundpadGui;
-use egui::{Context, Key};
+use egui::{Context, Id, Key, Modifiers};
+
+use std::path::PathBuf;
 
 impl SoundpadGui {
-    pub fn handle_input(&mut self, ctx: &Context) {
-        ctx.input(|i| {
-            if i.key_pressed(Key::Escape) {
-                std::process::exit(0);
-            }
+    fn key_pressed(&self, ctx: &Context, key: Key) -> bool {
+        ctx.input(|i| i.key_pressed(key))
+    }
 
-            if !self.app_state.show_settings && i.key_pressed(Key::Space) {
+    fn modifiers(&self, ctx: &Context) -> Modifiers {
+        ctx.input(|i| i.modifiers)
+    }
+
+    fn get_focused(&self, ctx: &Context) -> Option<Id> {
+        ctx.memory(|m| m.focused())
+    }
+
+    pub fn handle_input(&mut self, ctx: &Context) {
+        let modifiers = self.modifiers(ctx);
+        let search_focused = {
+            if let Some(focused_id) = self.get_focused(ctx)
+                && let Some(search_id) = self.app_state.search_field_id
+                && focused_id.eq(&search_id)
+            {
+                true
+            } else {
+                false
+            }
+        };
+
+        // Open/close settings
+        if !search_focused && self.key_pressed(ctx, Key::I) {
+            self.app_state.show_settings = !self.app_state.show_settings;
+        }
+
+        if !self.app_state.show_settings {
+            // Pause / resume audio on space
+            if !search_focused && self.key_pressed(ctx, Key::Space) {
                 self.play_toggle();
             }
 
-            if i.key_pressed(Key::Slash) {
-                self.app_state.show_settings = !self.app_state.show_settings;
+            // Stop all audio tracks on backspace
+            if !search_focused && self.key_pressed(ctx, Key::Backspace) {
+                self.stop(None);
             }
 
-            if self.app_state.show_settings && i.key_pressed(Key::Backspace) {
-                self.app_state.show_settings = false;
+            // Focus search field
+            if self.key_pressed(ctx, Key::Slash) {
+                if search_focused {
+                    ctx.memory_mut(|m| {
+                        m.request_focus(Id::NULL);
+                    });
+                } else {
+                    self.app_state.force_focus_search = true;
+                }
             }
-        });
+
+            // Play selected file on Enter
+            if self.key_pressed(ctx, Key::Enter) {
+                if let Some(path) = self.app_state.selected_file.clone() {
+                    if modifiers.ctrl {
+                        self.play_file(&path, true);
+                    } else if modifiers.shift
+                        && let Some(last_track) = self.audio_player_state.tracks.last()
+                    {
+                        self.stop(Some(last_track.id));
+                        self.play_file(&path, true);
+                    } else {
+                        self.play_file(&path, false);
+                    }
+                }
+            }
+
+            // Iterate through dirs and files with Ctrl + Up/Down
+            let arrow_up_pressed = self.key_pressed(ctx, Key::ArrowUp);
+            let arrow_down_pressed = self.key_pressed(ctx, Key::ArrowDown);
+            if modifiers.ctrl && (arrow_up_pressed || arrow_down_pressed) {
+                if modifiers.shift && !self.app_state.dirs.is_empty() {
+                    let mut dirs: Vec<PathBuf> = self.app_state.dirs.iter().cloned().collect();
+                    dirs.sort();
+
+                    let current_dir_index = self
+                        .app_state
+                        .current_dir
+                        .as_ref()
+                        .and_then(|cd| dirs.iter().position(|x| x == cd));
+
+                    let new_dir_index =
+                        match (current_dir_index, arrow_up_pressed, arrow_down_pressed) {
+                            (Some(i), true, false) => (i + dirs.len() - 1) % dirs.len(),
+                            (Some(i), false, true) => (i + 1) % dirs.len(),
+                            (Some(i), true, true) => i,
+                            (None, true, _) => dirs.len() - 1,
+                            (None, false, true) => 0,
+                            _ => return,
+                        };
+
+                    self.open_dir(&dirs[new_dir_index]);
+                } else if self.app_state.current_dir.is_some() {
+                    let files = self.get_filtered_files();
+
+                    if files.is_empty() {
+                        return;
+                    }
+
+                    let current_files_index = self
+                        .app_state
+                        .selected_file
+                        .as_ref()
+                        .and_then(|f| files.iter().position(|x| x == f));
+
+                    let new_files_index =
+                        match (current_files_index, arrow_up_pressed, arrow_down_pressed) {
+                            (Some(i), true, false) => (i + files.len() - 1) % files.len(),
+                            (Some(i), false, true) => (i + 1) % files.len(),
+                            (Some(i), true, true) => i,
+                            (None, true, _) => files.len() - 1,
+                            (None, false, true) => 0,
+                            _ => return,
+                        };
+
+                    self.app_state.selected_file = Some(files[new_files_index].clone());
+                }
+            }
+        }
+        // });
     }
 }

src/gui/mod.rs

@@ -4,6 +4,7 @@ mod update;
 
 use eframe::{HardwareAcceleration, NativeOptions, icon_data::from_png_bytes, run_native};
 use egui::{Context, Vec2, ViewportBuilder};
+use itertools::Itertools;
 use pwsp::{
     types::{
         audio_player::PlayerState,
@@ -13,16 +14,20 @@ use pwsp::{
     },
     utils::{
         daemon::get_daemon_config,
-        gui::{get_gui_config, make_request_sync, start_app_state_thread},
+        gui::{get_gui_config, make_request_async, make_request_sync, start_app_state_thread},
     },
 };
 use rfd::FileDialog;
-use std::path::PathBuf;
 use std::{
     error::Error,
+    path::PathBuf,
     sync::{Arc, Mutex},
 };
 
+const SUPPORTED_EXTENSIONS: [&str; 11] = [
+    "mp3", "wav", "ogg", "flac", "mp4", "m4a", "aac", "mov", "mkv", "webm", "avi",
+];
+
 struct SoundpadGui {
     pub app_state: AppState,
     pub config: GuiConfig,
@@ -52,55 +57,137 @@ impl SoundpadGui {
     }
 
     pub fn play_toggle(&mut self) {
-        let mut guard = self.audio_player_state_shared.lock().unwrap();
-        guard.state = match guard.state {
-            PlayerState::Playing => {
-                make_request_sync(Request::pause()).ok();
-                guard.new_state = Some(PlayerState::Paused);
-                PlayerState::Paused
+        let (new_state, request) = {
+            let guard = self
+                .audio_player_state_shared
+                .lock()
+                .unwrap_or_else(|e| e.into_inner());
+            match guard.state {
+                PlayerState::Playing => (Some(PlayerState::Paused), Some(Request::pause(None))),
+                PlayerState::Paused => (Some(PlayerState::Playing), Some(Request::resume(None))),
+                PlayerState::Stopped => (None, None),
             }
-            PlayerState::Paused => {
-                make_request_sync(Request::resume()).ok();
-                guard.new_state = Some(PlayerState::Playing);
-                PlayerState::Playing
-            }
-            PlayerState::Stopped => PlayerState::Stopped,
         };
+
+        if let Some(req) = request {
+            make_request_async(req);
+        }
+
+        if let Some(state) = new_state {
+            let mut guard = self
+                .audio_player_state_shared
+                .lock()
+                .unwrap_or_else(|e| e.into_inner());
+            guard.new_state = Some(state.clone());
+            guard.state = state;
+        }
     }
 
-    pub fn add_dir(&mut self) {
+    pub fn open_file(&mut self) {
+        let file_dialog = FileDialog::new().add_filter("Audio File", &SUPPORTED_EXTENSIONS);
+        if let Some(path) = file_dialog.pick_file() {
+            self.play_file(&path, false);
+        }
+    }
+
+    pub fn add_dirs(&mut self) {
         let file_dialog = FileDialog::new();
-        if let Some(path) = file_dialog.pick_folder() {
-            self.app_state.dirs.insert(path);
+        if let Some(paths) = file_dialog.pick_folders() {
+            for path in paths {
+                self.app_state.dirs.push(path);
+            }
+            self.app_state.dirs = self.app_state.dirs.iter().unique().cloned().collect();
             self.config.dirs = self.app_state.dirs.clone();
             self.config.save_to_file().ok();
         }
     }
 
-    pub fn remove_dir(&mut self, path: PathBuf) {
-        self.app_state.dirs.remove(&path);
-        if let Some(current_dir) = &self.app_state.current_dir
-            && current_dir == &path
-        {
-            self.app_state.current_dir = None;
+    pub fn open_dir(&mut self, path: &PathBuf) {
+        self.app_state.current_dir = Some(path.clone());
+        match path.read_dir() {
+            Ok(read_dir) => {
+                self.app_state.files = read_dir
+                    .filter_map(|res| res.ok())
+                    .map(|entry| entry.path())
+                    .collect();
+            }
+            Err(e) => {
+                eprintln!("Failed to read directory {:?}: {}", path, e);
+                self.app_state.files.clear();
+            }
         }
-        self.config.dirs = self.app_state.dirs.clone();
-        self.config.save_to_file().ok();
     }
 
-    pub fn play_file(&mut self, path: PathBuf) {
-        make_request_sync(Request::play(path.to_str().unwrap())).ok();
+    pub fn play_file(&mut self, path: &PathBuf, concurrent: bool) {
+        make_request_async(Request::play(&path.to_string_lossy(), concurrent));
     }
 
-    pub fn set_input(&mut self, id: u32) {
-        make_request_sync(Request::set_input(id)).ok();
+    pub fn set_input(&mut self, name: String) {
+        make_request_async(Request::set_input(&name));
 
         if self.config.save_input {
             let mut daemon_config = get_daemon_config();
-            daemon_config.default_input_id = Some(id);
+            daemon_config.default_input_name = Some(name);
             daemon_config.save_to_file().ok();
         }
     }
+
+    pub fn toggle_loop(&mut self, id: Option<u32>) {
+        make_request_async(Request::toggle_loop(id));
+    }
+
+    pub fn pause(&mut self, id: Option<u32>) {
+        make_request_async(Request::pause(id));
+    }
+
+    pub fn resume(&mut self, id: Option<u32>) {
+        make_request_async(Request::resume(id));
+    }
+
+    pub fn stop(&mut self, id: Option<u32>) {
+        make_request_async(Request::stop(id));
+    }
+
+    pub fn get_filtered_files(&self) -> Vec<PathBuf> {
+        let mut files: Vec<PathBuf> = self.app_state.files.iter().cloned().collect();
+        files.sort();
+
+        let search_query = self.app_state.search_query.to_lowercase();
+        let search_query = search_query.trim();
+
+        files
+            .into_iter()
+            .filter(|entry_path| {
+                if entry_path.is_dir() {
+                    return false;
+                }
+
+                if !SUPPORTED_EXTENSIONS.contains(
+                    &entry_path
+                        .extension()
+                        .unwrap_or_default()
+                        .to_str()
+                        .unwrap_or_default(),
+                ) {
+                    return false;
+                }
+
+                if !search_query.is_empty() {
+                    let file_name = entry_path
+                        .file_name()
+                        .unwrap_or_default()
+                        .to_string_lossy()
+                        .to_string();
+
+                    if !file_name.to_lowercase().contains(search_query) {
+                        return false;
+                    }
+                }
+
+                true
+            })
+            .collect()
+    }
 }
 
 pub async fn run() -> Result<(), Box<dyn Error>> {
@@ -128,7 +215,13 @@ pub async fn run() -> Result<(), Box<dyn Error>> {
             Ok(Box::new(SoundpadGui::new(&cc.egui_ctx)))
         }),
     ) {
-        Ok(_) => Ok(()),
+        Ok(_) => {
+            let config = get_gui_config();
+            if config.pause_on_exit {
+                make_request_sync(Request::pause(None)).ok();
+            }
+            Ok(())
+        }
         Err(e) => Err(e.into()),
     }
 }

src/gui/update.rs

@@ -3,19 +3,88 @@ use eframe::{App, Frame as EFrame};
 use egui::{CentralPanel, Context};
 use pwsp::{
     types::socket::Request,
-    utils::{
-        daemon::{get_daemon_config, is_daemon_running},
-        gui::make_request_sync,
-    },
+    utils::{daemon::get_daemon_config, gui::make_request_async},
 };
+use std::time::{Duration, Instant};
 
 impl App for SoundpadGui {
-    fn update(&mut self, ctx: &Context, _frame: &mut EFrame) {
+    fn logic(&mut self, ctx: &Context, _frame: &mut EFrame) {
+        // Remove directories
+        for path in self.app_state.dirs_to_remove.drain() {
+            self.app_state.dirs.retain(|x| x != &path);
+            if let Some(current_dir) = &self.app_state.current_dir
+                && current_dir == &path
+            {
+                self.app_state.current_dir = None;
+                self.app_state.files.clear();
+            }
+        }
+
+        // Save directories if changed
+        if !self.config.dirs.eq(&self.app_state.dirs) {
+            self.config.dirs = self.app_state.dirs.clone();
+            self.config.save_to_file().ok();
+        }
+
+        // Seek and volume requests
+        let mut seek_requests = vec![];
+        let mut volume_requests = vec![];
+
+        for (id, ui_state) in &mut self.app_state.track_ui_states {
+            if ui_state.position_dragged {
+                seek_requests.push((*id, ui_state.position_slider_value));
+            }
+            if ui_state.volume_dragged {
+                volume_requests.push((*id, ui_state.volume_slider_value));
+                ui_state.volume_dragged = false;
+            }
+        }
+
+        for (id, pos) in seek_requests {
+            make_request_async(Request::seek(pos, Some(id)));
+            if let Some(ui_state) = self.app_state.track_ui_states.get_mut(&id) {
+                ui_state.position_dragged = false;
+                ui_state.ignore_position_update_until =
+                    Some(Instant::now() + Duration::from_millis(300));
+            }
+        }
+
+        for (id, vol) in volume_requests {
+            make_request_async(Request::set_volume(vol, Some(id)));
+            if let Some(ui_state) = self.app_state.track_ui_states.get_mut(&id) {
+                ui_state.volume_dragged = false;
+                ui_state.ignore_volume_update_until =
+                    Some(Instant::now() + Duration::from_millis(300));
+            }
+        }
+
+        if self.app_state.volume_dragged {
+            make_request_async(Request::set_volume(
+                self.app_state.volume_slider_value,
+                None,
+            ));
+
+            self.app_state.volume_dragged = false;
+            self.app_state.ignore_volume_update_until =
+                Some(Instant::now() + Duration::from_millis(300));
+
+            if self.config.save_volume {
+                let mut daemon_config = get_daemon_config();
+                daemon_config.default_volume = Some(self.app_state.volume_slider_value);
+                daemon_config.save_to_file().ok();
+            }
+        }
+
+        // Sync audio player state
         {
-            let guard = self.audio_player_state_shared.lock().unwrap();
+            let guard = self
+                .audio_player_state_shared
+                .lock()
+                .unwrap_or_else(|e| e.into_inner());
             self.audio_player_state = guard.clone();
         }
 
+        // Handle scale factor changes
         let old_scale_factor = self.config.scale_factor;
         let new_scale_factor = ctx.zoom_factor().clamp(0.5, 2.0);
 
@@ -26,10 +95,14 @@ impl App for SoundpadGui {
             self.config.save_to_file().ok();
         }
 
+        // Handle input
         self.handle_input(ctx);
+    }
 
-        CentralPanel::default().show(ctx, |ui| {
-            if !is_daemon_running().unwrap() {
+    fn ui(&mut self, ui: &mut egui::Ui, _frame: &mut EFrame) {
+        // Draw UI
+        CentralPanel::default().show_inside(ui, |ui| {
+            if !self.audio_player_state.is_daemon_running {
                 self.draw_waiting_for_daemon(ui);
                 return;
             }
@@ -42,36 +115,7 @@ impl App for SoundpadGui {
             self.draw(ui).ok();
         });
 
-        if self.app_state.position_dragged {
-            make_request_sync(Request::seek(self.app_state.position_slider_value)).ok();
-            let mut guard = self.audio_player_state_shared.lock().unwrap();
-            guard.new_position = Some(self.app_state.position_slider_value);
-            guard.position = self.app_state.position_slider_value;
-            self.app_state.position_dragged = false;
-        } else {
-            self.app_state.position_slider_value = self.audio_player_state.position;
-        }
-
-        if self.app_state.volume_dragged {
-            let new_volume = self.app_state.volume_slider_value;
-
-            make_request_sync(Request::set_volume(new_volume)).ok();
-
-            let mut guard = self.audio_player_state_shared.lock().unwrap();
-            guard.new_volume = Some(self.app_state.volume_slider_value);
-            guard.volume = self.app_state.volume_slider_value;
-
-            self.app_state.volume_dragged = false;
-
-            if self.config.save_volume {
-                let mut daemon_config = get_daemon_config();
-                daemon_config.default_volume = Some(new_volume);
-                daemon_config.save_to_file().ok();
-            }
-        } else {
-            self.app_state.volume_slider_value = self.audio_player_state.volume;
-        }
-
-        ctx.request_repaint_after_secs(1.0 / 60.0);
+        // Request repaint
+        ui.request_repaint_after_secs(1.0 / 60.0);
     }
 }

src/types/audio_player.rs

@@ -1,13 +1,14 @@
 use crate::{
-    types::pipewire::{AudioDevice, DeviceType, Terminate},
+    types::pipewire::{DeviceType, Terminate},
     utils::{
         daemon::get_daemon_config,
-        pipewire::{create_link, get_all_devices, get_device},
+        pipewire::{create_link, get_device},
     },
 };
-use rodio::{Decoder, OutputStream, OutputStreamBuilder, Sink, Source};
+use rodio::{Decoder, DeviceSinkBuilder, MixerDeviceSink, Player, Source};
 use serde::{Deserialize, Serialize};
 use std::{
+    collections::HashMap,
     error::Error,
     fs,
     path::{Path, PathBuf},
@@ -22,49 +23,65 @@ pub enum PlayerState {
     Playing,
 }
 
+#[derive(Debug, Clone, Serialize, Deserialize)]
+pub struct TrackInfo {
+    pub id: u32,
+    pub path: PathBuf,
+    pub duration: Option<f32>,
+    pub position: f32,
+    pub volume: f32,
+    pub looped: bool,
+    pub paused: bool,
+}
+
+#[derive(Default, Debug, Clone, Serialize, Deserialize)]
+pub struct FullState {
+    pub state: PlayerState,
+    pub tracks: Vec<TrackInfo>,
+    pub volume: f32,
+    pub current_input: String,
+    pub all_inputs: HashMap<String, String>,
+}
+
+pub struct PlayingSound {
+    pub id: u32,
+    pub sink: Player,
+    pub path: PathBuf,
+    pub duration: Option<f32>,
+    pub looped: bool,
+    pub volume: f32,
+}
+
 pub struct AudioPlayer {
-    _stream_handle: OutputStream,
-    sink: Sink,
+    pub stream_handle: MixerDeviceSink,
+    pub tracks: HashMap<u32, PlayingSound>,
+    pub next_id: u32,
 
     input_link_sender: Option<pipewire::channel::Sender<Terminate>>,
-    pub current_input_device: Option<AudioDevice>,
+    pub input_device_name: Option<String>,
 
-    pub volume: f32,
-    pub duration: Option<f32>,
-
-    pub current_file_path: Option<PathBuf>,
+    pub volume: f32, // Master volume
 }
 
 impl AudioPlayer {
     pub async fn new() -> Result<Self, Box<dyn Error>> {
         let daemon_config = get_daemon_config();
         let default_volume = daemon_config.default_volume.unwrap_or(1.0);
-        let mut default_input_device: Option<AudioDevice> = None;
-        if let Some(id) = daemon_config.default_input_id
-            && let Ok(device) = get_device(id).await
-            && device.device_type == DeviceType::Input
-        {
-            default_input_device = Some(device);
-        }
 
-        let stream_handle = OutputStreamBuilder::open_default_stream()?;
-        let sink = Sink::connect_new(stream_handle.mixer());
-        sink.set_volume(default_volume);
+        let stream_handle = DeviceSinkBuilder::open_default_sink()?;
 
         let mut audio_player = AudioPlayer {
-            _stream_handle: stream_handle,
-            sink,
+            stream_handle,
+            tracks: HashMap::new(),
+            next_id: 1,
 
             input_link_sender: None,
-            current_input_device: default_input_device.clone(),
+            input_device_name: daemon_config.default_input_name.clone(),
 
             volume: default_volume,
-            duration: None,
-
-            current_file_path: None,
         };
 
-        if default_input_device.is_some() {
+        if audio_player.input_device_name.is_some() {
             audio_player.link_devices().await?;
         }
 
@@ -74,8 +91,11 @@ impl AudioPlayer {
     fn abort_link_thread(&mut self) {
         if let Some(sender) = &self.input_link_sender {
             match sender.send(Terminate {}) {
-                Ok(_) => println!("Sent terminate signal to link thread"),
-                Err(_) => println!("Failed to send terminate signal to link thread"),
+                Ok(_) => {
+                    println!("Sent terminate signal to link thread");
+                    self.input_link_sender = None;
+                }
+                Err(_) => eprintln!("Failed to send terminate signal to link thread"),
             }
         }
     }
@@ -83,155 +103,325 @@ impl AudioPlayer {
     async fn link_devices(&mut self) -> Result<(), Box<dyn Error>> {
         self.abort_link_thread();
 
-        if self.current_input_device.is_none() {
-            println!("No input device selected, skipping device linking");
-            return Ok(());
-        }
-
-        let (input_devices, _) = get_all_devices().await?;
-
-        let mut pwsp_daemon_input: Option<AudioDevice> = None;
-        for input_device in input_devices {
-            if input_device.name == "pwsp-virtual-mic" {
-                pwsp_daemon_input = Some(input_device);
-                break;
+        let input_device;
+        if let Some(input_device_name) = &self.input_device_name {
+            if let Ok(device) = get_device(input_device_name).await {
+                input_device = device;
+            } else {
+                eprintln!(
+                    "Could not find selected input device {}, skipping device linking",
+                    input_device_name
+                );
+                return Ok(());
             }
-        }
-
-        if pwsp_daemon_input.is_none() {
-            println!("Could not find pwsp-daemon input device, skipping device linking");
+        } else {
+            eprintln!("No input device selected, skipping device linking");
             return Ok(());
         }
 
-        let pwsp_daemon_input = pwsp_daemon_input.unwrap();
+        let daemon_input;
+        if let Ok(device) = get_device("pwsp-virtual-mic").await {
+            daemon_input = device;
+        } else {
+            eprintln!("Could not find pwsp-virtual-mic device, skipping device linking");
+            return Ok(());
+        }
+
+        let Some(output_fl) = input_device.output_fl.clone() else {
+            eprintln!("Failed to get pwsp-daemon output_fl");
+            return Ok(());
+        };
+        let Some(output_fr) = input_device.output_fr.clone() else {
+            eprintln!("Failed to get pwsp-daemon output_fr");
+            return Ok(());
+        };
+        let Some(input_fl) = daemon_input.input_fl.clone() else {
+            eprintln!("Failed to get pwsp-daemon input_fl");
+            return Ok(());
+        };
+        let Some(input_fr) = daemon_input.input_fr.clone() else {
+            eprintln!("Failed to get pwsp-daemon input_fr");
+            return Ok(());
+        };
 
-        let current_input_device = self.current_input_device.clone().unwrap();
-        let output_fl = current_input_device
-            .clone()
-            .output_fl
-            .expect("Failed to get pwsp-daemon output_fl");
-        let output_fr = current_input_device
-            .clone()
-            .output_fr
-            .expect("Failed to get pwsp-daemon output_fl");
-        let input_fl = pwsp_daemon_input
-            .clone()
-            .input_fl
-            .expect("Failed to get pwsp-daemon input_fl");
-        let input_fr = pwsp_daemon_input
-            .clone()
-            .input_fr
-            .expect("Failed to get pwsp-daemon input_fr");
         self.input_link_sender = Some(create_link(output_fl, output_fr, input_fl, input_fr)?);
 
         Ok(())
     }
 
-    pub fn pause(&mut self) {
-        if self.get_state() == PlayerState::Playing {
-            self.sink.pause();
+    pub fn pause(&mut self, id: Option<u32>) {
+        if let Some(id) = id {
+            if let Some(sound) = self.tracks.get_mut(&id) {
+                sound.sink.pause();
+            }
+        } else {
+            for sound in self.tracks.values_mut() {
+                sound.sink.pause();
+            }
         }
     }
 
-    pub fn resume(&mut self) {
-        if self.get_state() == PlayerState::Paused {
-            self.sink.play();
+    pub fn resume(&mut self, id: Option<u32>) {
+        if let Some(id) = id {
+            if let Some(sound) = self.tracks.get_mut(&id) {
+                sound.sink.play();
+            }
+        } else {
+            for sound in self.tracks.values_mut() {
+                sound.sink.play();
+            }
         }
     }
 
-    pub fn stop(&mut self) {
-        self.sink.stop();
+    pub fn stop(&mut self, id: Option<u32>) {
+        if let Some(id) = id {
+            self.tracks.remove(&id);
+        } else {
+            self.tracks.clear();
+        }
     }
 
     pub fn is_paused(&self) -> bool {
-        self.sink.is_paused()
+        if self.tracks.is_empty() {
+            return false;
+        }
+        self.tracks.values().all(|s| s.sink.is_paused())
     }
 
-    pub fn get_state(&mut self) -> PlayerState {
-        if self.sink.len() == 0 {
+    pub fn get_state(&self) -> PlayerState {
+        if self.tracks.is_empty() {
             return PlayerState::Stopped;
         }
 
-        if self.sink.is_paused() {
+        if self
+            .tracks
+            .values()
+            .any(|s| !s.sink.is_paused() && !s.sink.empty())
+        {
+            return PlayerState::Playing;
+        }
+
+        if self.is_paused() {
             return PlayerState::Paused;
         }
 
-        PlayerState::Playing
+        PlayerState::Stopped
     }
 
-    pub fn set_volume(&mut self, volume: f32) {
-        self.volume = volume;
-        self.sink.set_volume(volume);
-    }
-
-    pub fn get_position(&mut self) -> f32 {
-        if self.get_state() == PlayerState::Stopped {
-            return 0.0;
-        }
-
-        self.sink.get_pos().as_secs_f32()
-    }
-
-    pub fn seek(&mut self, position: f32) -> Result<(), Box<dyn Error>> {
-        match self.sink.try_seek(Duration::from_secs_f32(position)) {
-            Ok(_) => Ok(()),
-            Err(err) => Err(err.into()),
-        }
-    }
-
-    pub fn get_duration(&mut self) -> Result<f32, Box<dyn Error>> {
-        if self.get_state() == PlayerState::Stopped {
-            Err("Nothing is playing right now".into())
+    pub fn get_volume(&mut self, id: Option<u32>) -> Option<f32> {
+        if let Some(id) = id {
+            if let Some(sound) = self.tracks.get_mut(&id) {
+                return Some(sound.sink.volume());
+            } else {
+                return None;
+            }
         } else {
-            match self.duration {
-                Some(duration) => Ok(duration),
-                None => Err("Couldn't determine duration for current file".into()),
+            return Some(self.volume);
+        }
+    }
+
+    pub fn set_volume(&mut self, volume: f32, id: Option<u32>) {
+        if let Some(id) = id {
+            if let Some(sound) = self.tracks.get_mut(&id) {
+                sound.volume = volume;
+                sound.sink.set_volume(self.volume * volume);
+            }
+        } else {
+            self.volume = volume;
+            for sound in self.tracks.values_mut() {
+                sound.sink.set_volume(self.volume * sound.volume);
             }
         }
     }
 
-    pub async fn play(&mut self, file_path: &Path) -> Result<(), Box<dyn Error>> {
-        if !file_path.exists() {
-            return Err(format!("File does not exist: {}", file_path.display()).into());
+    pub fn get_position(&self, id: Option<u32>) -> f32 {
+        if let Some(id) = id {
+            if let Some(sound) = self.tracks.get(&id) {
+                return sound.sink.get_pos().as_secs_f32();
+            }
+        } else if let Some(sound) = self.tracks.values().last() {
+            // Fallback to last added track if no ID
+            return sound.sink.get_pos().as_secs_f32();
         }
+        0.0
+    }
 
-        let file = fs::File::open(file_path)?;
-        match Decoder::try_from(file) {
-            Ok(source) => {
-                self.current_file_path = Some(file_path.to_path_buf());
+    pub fn seek(&mut self, position: f32, id: Option<u32>) -> Result<(), Box<dyn Error>> {
+        let position = if position < 0.0 { 0.0 } else { position };
 
-                if let Some(duration) = source.total_duration() {
-                    self.duration = Some(duration.as_secs_f32());
-                } else {
-                    self.duration = None;
+        if let Some(id) = id {
+            if let Some(sound) = self.tracks.get_mut(&id) {
+                sound.sink.try_seek(Duration::from_secs_f32(position))?;
+            }
+        } else {
+            // Seek all? Or last? Let's seek all for now if no ID provided
+            for sound in self.tracks.values_mut() {
+                sound.sink.try_seek(Duration::from_secs_f32(position)).ok();
+            }
+        }
+        Ok(())
+    }
+
+    pub fn get_duration(&mut self, id: Option<u32>) -> Result<f32, Box<dyn Error>> {
+        if let Some(id) = id {
+            if let Some(sound) = self.tracks.get(&id) {
+                return sound.duration.ok_or("Unknown duration".into());
+            }
+        } else if let Some(sound) = self.tracks.values().last() {
+            return sound.duration.ok_or("Unknown duration".into());
+        }
+        Err("No track playing".into())
+    }
+
+    pub async fn play(
+        &mut self,
+        file_path: &Path,
+        concurrent: bool,
+    ) -> Result<u32, Box<dyn Error>> {
+        let path_buf = file_path.to_path_buf();
+
+        let decoder_result =
+            tokio::task::spawn_blocking(move || -> Result<_, Box<dyn Error + Send + Sync>> {
+                if !path_buf.exists() {
+                    return Err(format!("File does not exist: {}", path_buf.display()).into());
                 }
 
-                self.sink.stop();
-                self.sink.append(source);
-                self.sink.play();
-                self.link_devices().await?;
+                let file = fs::File::open(&path_buf)?;
+                let decoder = Decoder::try_from(file)
+                    .map_err(|e| Box::new(e) as Box<dyn Error + Send + Sync>)?;
+                Ok(decoder)
+            })
+            .await?;
 
-                Ok(())
+        match decoder_result {
+            Ok(source) => {
+                if !concurrent {
+                    self.tracks.clear();
+                }
+
+                let id = self.next_id;
+                self.next_id += 1;
+
+                let duration = source.total_duration().map(|d| d.as_secs_f32());
+
+                let sink = Player::connect_new(self.stream_handle.mixer());
+                sink.set_volume(self.volume); // Default volume is 1.0 * master
+                sink.append(source);
+                sink.play();
+
+                let sound = PlayingSound {
+                    id,
+                    sink,
+                    path: file_path.to_path_buf(),
+                    duration,
+                    looped: false,
+                    volume: 1.0,
+                };
+
+                self.tracks.insert(id, sound);
+
+                Ok(id)
             }
-            Err(err) => Err(err.into()),
+            Err(err) => Err(err as Box<dyn Error>),
         }
     }
 
-    pub fn get_current_file_path(&mut self) -> &Option<PathBuf> {
-        if self.get_state() == PlayerState::Stopped {
-            self.current_file_path = None;
+    pub fn set_loop(&mut self, enabled: bool, id: Option<u32>) {
+        if let Some(id) = id {
+            if let Some(sound) = self.tracks.get_mut(&id) {
+                sound.looped = enabled;
+            }
+        } else {
+            // Set loop for all? Or just last?
+            // Let's set for all.
+            for sound in self.tracks.values_mut() {
+                sound.looped = enabled;
+            }
         }
-        &self.current_file_path
     }
 
-    pub async fn set_current_input_device(&mut self, id: u32) -> Result<(), Box<dyn Error>> {
-        let input_device = get_device(id).await?;
+    pub fn get_tracks(&self) -> Vec<TrackInfo> {
+        let mut tracks: Vec<_> = self
+            .tracks
+            .values()
+            .map(|sound| TrackInfo {
+                id: sound.id,
+                path: sound.path.clone(),
+                duration: sound.duration,
+                position: sound.sink.get_pos().as_secs_f32(),
+                volume: sound.volume,
+                looped: sound.looped,
+                paused: sound.sink.is_paused(),
+            })
+            .collect();
+        tracks.sort_by_key(|t| t.id);
+        tracks
+    }
+
+    pub async fn update(&mut self) {
+        if let Some(input_device_name) = &self.input_device_name {
+            // Unlink devices if selected input device was removed
+            if self.input_link_sender.is_some() && get_device(input_device_name).await.is_err() {
+                // Selected input device was removed
+                eprintln!(
+                    "Selected input device {} was removed, unlinking devices",
+                    input_device_name
+                );
+                self.abort_link_thread();
+            }
+            // Link devices if not linked
+            else if self.input_link_sender.is_none() {
+                self.link_devices().await.ok();
+            }
+        }
+
+        // Handle looped sounds
+        let mut restarts = vec![];
+
+        for (id, sound) in &self.tracks {
+            if sound.sink.empty() && sound.looped {
+                restarts.push(*id);
+            }
+        }
+
+        let mut restart_futures = vec![];
+
+        for id in restarts {
+            if let Some(sound) = self.tracks.get(&id) {
+                let path = sound.path.clone();
+                let handle = tokio::task::spawn_blocking(move || {
+                    if let Ok(file) = fs::File::open(&path) {
+                        if let Ok(source) = Decoder::try_from(file) {
+                            return Some((id, source));
+                        }
+                    }
+                    None
+                });
+                restart_futures.push(handle);
+            }
+        }
+
+        for handle in restart_futures {
+            if let Ok(Some((id, source))) = handle.await {
+                if let Some(sound) = self.tracks.get_mut(&id) {
+                    sound.sink.append(source);
+                    sound.sink.play();
+                }
+            }
+        }
+
+        self.tracks
+            .retain(|_, sound| !sound.sink.empty() || sound.looped);
+    }
+
+    pub async fn set_current_input_device(&mut self, name: &str) -> Result<(), Box<dyn Error>> {
+        let input_device = get_device(name).await?;
 
         if input_device.device_type != DeviceType::Input {
             return Err("Selected device is not an input device".into());
         }
 
-        self.current_input_device = Some(input_device);
+        self.input_device_name = Some(name.to_string());
 
         self.link_devices().await?;
 

src/types/commands.rs

@@ -1,9 +1,15 @@
 use crate::{
-    types::socket::Response,
-    utils::{daemon::get_audio_player, pipewire::get_all_devices},
+    types::{
+        audio_player::{FullState, PlayerState},
+        socket::Response,
+    },
+    utils::{
+        daemon::get_audio_player,
+        pipewire::{get_all_devices, get_device},
+    },
 };
 use async_trait::async_trait;
-use std::path::PathBuf;
+use std::{collections::HashMap, path::PathBuf};
 
 #[async_trait]
 pub trait Executable {
@@ -12,44 +18,78 @@ pub trait Executable {
 
 pub struct PingCommand {}
 
-pub struct PauseCommand {}
+pub struct KillCommand {}
 
-pub struct ResumeCommand {}
+pub struct PauseCommand {
+    pub id: Option<u32>,
+}
 
-pub struct StopCommand {}
+pub struct ResumeCommand {
+    pub id: Option<u32>,
+}
+
+pub struct TogglePauseCommand {
+    pub id: Option<u32>,
+}
+
+pub struct StopCommand {
+    pub id: Option<u32>,
+}
 
 pub struct IsPausedCommand {}
 
 pub struct GetStateCommand {}
 
-pub struct GetVolumeCommand {}
+pub struct GetVolumeCommand {
+    pub id: Option<u32>,
+}
 
 pub struct SetVolumeCommand {
     pub volume: Option<f32>,
+    pub id: Option<u32>,
 }
 
-pub struct GetPositionCommand {}
+pub struct GetPositionCommand {
+    pub id: Option<u32>,
+}
 
 pub struct SeekCommand {
     pub position: Option<f32>,
+    pub id: Option<u32>,
 }
 
-pub struct GetDurationCommand {}
+pub struct GetDurationCommand {
+    pub id: Option<u32>,
+}
 
 pub struct PlayCommand {
     pub file_path: Option<PathBuf>,
+    pub concurrent: Option<bool>,
 }
 
-pub struct GetCurrentFilePathCommand {}
+pub struct GetTracksCommand {}
 
 pub struct GetCurrentInputCommand {}
 
 pub struct GetAllInputsCommand {}
 
 pub struct SetCurrentInputCommand {
+    pub name: Option<String>,
+}
+
+pub struct SetLoopCommand {
+    pub enabled: Option<bool>,
     pub id: Option<u32>,
 }
 
+pub struct ToggleLoopCommand {
+    pub id: Option<u32>,
+}
+
+pub struct GetDaemonVersionCommand {}
+
+pub struct GetFullStateCommand {}
+
 #[async_trait]
 impl Executable for PingCommand {
     async fn execute(&self) -> Response {
@@ -57,11 +97,21 @@ impl Executable for PingCommand {
     }
 }
 
+#[async_trait]
+impl Executable for KillCommand {
+    async fn execute(&self) -> Response {
+        Response::new(true, "killed")
+    }
+}
+
 #[async_trait]
 impl Executable for PauseCommand {
     async fn execute(&self) -> Response {
-        let mut audio_player = get_audio_player().await.lock().await;
-        audio_player.pause();
+        let mut audio_player = match get_audio_player().await {
+            Ok(player) => player.lock().await,
+            Err(err) => return Response::new(false, format!("Audio player error: {}", err)),
+        };
+        audio_player.pause(self.id);
         Response::new(true, "Audio was paused")
     }
 }
@@ -69,17 +119,64 @@ impl Executable for PauseCommand {
 #[async_trait]
 impl Executable for ResumeCommand {
     async fn execute(&self) -> Response {
-        let mut audio_player = get_audio_player().await.lock().await;
-        audio_player.resume();
+        let mut audio_player = match get_audio_player().await {
+            Ok(player) => player.lock().await,
+            Err(err) => return Response::new(false, format!("Audio player error: {}", err)),
+        };
+        audio_player.resume(self.id);
         Response::new(true, "Audio was resumed")
     }
 }
 
+#[async_trait]
+impl Executable for TogglePauseCommand {
+    async fn execute(&self) -> Response {
+        let mut audio_player = match get_audio_player().await {
+            Ok(player) => player.lock().await,
+            Err(err) => return Response::new(false, format!("Audio player error: {}", err)),
+        };
+
+        if audio_player.get_state() == PlayerState::Stopped {
+            return Response::new(false, "Audio is not playing");
+        }
+
+        // This logic is a bit tricky with multiple tracks.
+        // If ID is provided, toggle that track.
+        // If not, toggle global pause state?
+        // For now, let's just use pause/resume based on global state if no ID.
+
+        if let Some(id) = self.id {
+            if let Some(track) = audio_player.tracks.get(&id) {
+                if track.sink.is_paused() {
+                    audio_player.resume(Some(id));
+                    Response::new(true, "Audio was resumed")
+                } else {
+                    audio_player.pause(Some(id));
+                    Response::new(true, "Audio was paused")
+                }
+            } else {
+                Response::new(false, "Track not found")
+            }
+        } else {
+            if audio_player.is_paused() {
+                audio_player.resume(None);
+                Response::new(true, "Audio was resumed")
+            } else {
+                audio_player.pause(None);
+                Response::new(true, "Audio was paused")
+            }
+        }
+    }
+}
+
 #[async_trait]
 impl Executable for StopCommand {
     async fn execute(&self) -> Response {
-        let mut audio_player = get_audio_player().await.lock().await;
-        audio_player.stop();
+        let mut audio_player = match get_audio_player().await {
+            Ok(player) => player.lock().await,
+            Err(err) => return Response::new(false, format!("Audio player error: {}", err)),
+        };
+        audio_player.stop(self.id);
         Response::new(true, "Audio was stopped")
     }
 }
@@ -87,7 +184,10 @@ impl Executable for StopCommand {
 #[async_trait]
 impl Executable for IsPausedCommand {
     async fn execute(&self) -> Response {
-        let audio_player = get_audio_player().await.lock().await;
+        let audio_player = match get_audio_player().await {
+            Ok(player) => player.lock().await,
+            Err(err) => return Response::new(false, format!("Audio player error: {}", err)),
+        };
         let is_paused = audio_player.is_paused().to_string();
         Response::new(true, is_paused)
     }
@@ -96,18 +196,32 @@ impl Executable for IsPausedCommand {
 #[async_trait]
 impl Executable for GetStateCommand {
     async fn execute(&self) -> Response {
-        let mut audio_player = get_audio_player().await.lock().await;
+        let audio_player = match get_audio_player().await {
+            Ok(player) => player.lock().await,
+            Err(err) => return Response::new(false, format!("Audio player error: {}", err)),
+        };
         let state = audio_player.get_state();
-        Response::new(true, serde_json::to_string(&state).unwrap())
+        match serde_json::to_string(&state) {
+            Ok(json) => Response::new(true, json),
+            Err(err) => Response::new(false, format!("Failed to serialize state: {}", err)),
+        }
     }
 }
 
 #[async_trait]
 impl Executable for GetVolumeCommand {
     async fn execute(&self) -> Response {
-        let audio_player = get_audio_player().await.lock().await;
-        let volume = audio_player.volume;
-        Response::new(true, volume.to_string())
+        let mut audio_player = match get_audio_player().await {
+            Ok(player) => player.lock().await,
+            Err(err) => return Response::new(false, format!("Audio player error: {}", err)),
+        };
+        let volume = audio_player.get_volume(self.id);
+
+        if let Some(volume) = volume {
+            Response::new(true, volume.to_string())
+        } else {
+            Response::new(false, "Failed to get volume")
+        }
     }
 }
 
@@ -115,8 +229,11 @@ impl Executable for GetVolumeCommand {
 impl Executable for SetVolumeCommand {
     async fn execute(&self) -> Response {
         if let Some(volume) = self.volume {
-            let mut audio_player = get_audio_player().await.lock().await;
-            audio_player.set_volume(volume);
+            let mut audio_player = match get_audio_player().await {
+                Ok(player) => player.lock().await,
+                Err(err) => return Response::new(false, format!("Audio player error: {}", err)),
+            };
+            audio_player.set_volume(volume, self.id);
             Response::new(true, format!("Audio volume was set to {}", volume))
         } else {
             Response::new(false, "Invalid volume value")
@@ -127,8 +244,11 @@ impl Executable for SetVolumeCommand {
 #[async_trait]
 impl Executable for GetPositionCommand {
     async fn execute(&self) -> Response {
-        let mut audio_player = get_audio_player().await.lock().await;
-        let position = audio_player.get_position();
+        let audio_player = match get_audio_player().await {
+            Ok(player) => player.lock().await,
+            Err(err) => return Response::new(false, format!("Audio player error: {}", err)),
+        };
+        let position = audio_player.get_position(self.id);
         Response::new(true, position.to_string())
     }
 }
@@ -137,8 +257,11 @@ impl Executable for GetPositionCommand {
 impl Executable for SeekCommand {
     async fn execute(&self) -> Response {
         if let Some(position) = self.position {
-            let mut audio_player = get_audio_player().await.lock().await;
-            match audio_player.seek(position) {
+            let mut audio_player = match get_audio_player().await {
+                Ok(player) => player.lock().await,
+                Err(err) => return Response::new(false, format!("Audio player error: {}", err)),
+            };
+            match audio_player.seek(position, self.id) {
                 Ok(_) => Response::new(true, format!("Audio position was set to {}", position)),
                 Err(err) => Response::new(false, err.to_string()),
             }
@@ -151,8 +274,11 @@ impl Executable for SeekCommand {
 #[async_trait]
 impl Executable for GetDurationCommand {
     async fn execute(&self) -> Response {
-        let mut audio_player = get_audio_player().await.lock().await;
-        match audio_player.get_duration() {
+        let mut audio_player = match get_audio_player().await {
+            Ok(player) => player.lock().await,
+            Err(err) => return Response::new(false, format!("Audio player error: {}", err)),
+        };
+        match audio_player.get_duration(self.id) {
             Ok(duration) => Response::new(true, duration.to_string()),
             Err(err) => Response::new(false, err.to_string()),
         }
@@ -163,9 +289,15 @@ impl Executable for GetDurationCommand {
 impl Executable for PlayCommand {
     async fn execute(&self) -> Response {
         if let Some(file_path) = &self.file_path {
-            let mut audio_player = get_audio_player().await.lock().await;
-            match audio_player.play(file_path).await {
-                Ok(_) => Response::new(true, format!("Now playing {}", file_path.display())),
+            let mut audio_player = match get_audio_player().await {
+                Ok(player) => player.lock().await,
+                Err(err) => return Response::new(false, format!("Audio player error: {}", err)),
+            };
+            match audio_player
+                .play(file_path, self.concurrent.unwrap_or(false))
+                .await
+            {
+                Ok(id) => Response::new(true, id.to_string()),
                 Err(err) => Response::new(false, err.to_string()),
             }
         } else {
@@ -175,14 +307,16 @@ impl Executable for PlayCommand {
 }
 
 #[async_trait]
-impl Executable for GetCurrentFilePathCommand {
+impl Executable for GetTracksCommand {
     async fn execute(&self) -> Response {
-        let mut audio_player = get_audio_player().await.lock().await;
-        let current_file_path = audio_player.get_current_file_path();
-        if let Some(current_file_path) = current_file_path {
-            Response::new(true, current_file_path.to_str().unwrap())
-        } else {
-            Response::new(false, "No file is playing")
+        let audio_player = match get_audio_player().await {
+            Ok(player) => player.lock().await,
+            Err(err) => return Response::new(false, format!("Audio player error: {}", err)),
+        };
+        let tracks = audio_player.get_tracks();
+        match serde_json::to_string(&tracks) {
+            Ok(json) => Response::new(true, json),
+            Err(err) => Response::new(false, format!("Failed to serialize tracks: {}", err)),
         }
     }
 }
@@ -190,9 +324,19 @@ impl Executable for GetCurrentFilePathCommand {
 #[async_trait]
 impl Executable for GetCurrentInputCommand {
     async fn execute(&self) -> Response {
-        let audio_player = get_audio_player().await.lock().await;
-        if let Some(input_device) = &audio_player.current_input_device {
-            Response::new(true, format!("{} - {}", input_device.id, input_device.nick))
+        let audio_player = match get_audio_player().await {
+            Ok(player) => player.lock().await,
+            Err(err) => return Response::new(false, format!("Audio player error: {}", err)),
+        };
+        if let Some(input_device_name) = &audio_player.input_device_name {
+            if let Ok(input_device) = get_device(input_device_name).await {
+                Response::new(
+                    true,
+                    format!("{} - {}", input_device.name, input_device.nick),
+                )
+            } else {
+                Response::new(false, "Failed to get current input device")
+            }
         } else {
             Response::new(false, "No input device selected")
         }
@@ -202,14 +346,17 @@ impl Executable for GetCurrentInputCommand {
 #[async_trait]
 impl Executable for GetAllInputsCommand {
     async fn execute(&self) -> Response {
-        let (input_devices, _output_devices) = get_all_devices().await.unwrap();
+        let (input_devices, _output_devices) = match get_all_devices().await {
+            Ok(devices) => devices,
+            Err(err) => return Response::new(false, format!("Failed to get devices: {}", err)),
+        };
         let mut input_devices_strings = vec![];
         for device in input_devices {
             if device.name == "pwsp-virtual-mic" {
                 continue;
             }
 
-            let string = format!("{} - {}", device.id, device.nick);
+            let string = format!("{} - {}", device.name, device.nick);
             input_devices_strings.push(string);
         }
         let response_message = input_devices_strings.join("; ");
@@ -221,9 +368,12 @@ impl Executable for GetAllInputsCommand {
 #[async_trait]
 impl Executable for SetCurrentInputCommand {
     async fn execute(&self) -> Response {
-        if let Some(id) = self.id {
-            let mut audio_player = get_audio_player().await.lock().await;
-            match audio_player.set_current_input_device(id).await {
+        if let Some(name) = &self.name {
+            let mut audio_player = match get_audio_player().await {
+                Ok(player) => player.lock().await,
+                Err(err) => return Response::new(false, format!("Audio player error: {}", err)),
+            };
+            match audio_player.set_current_input_device(name).await {
                 Ok(_) => Response::new(true, "Input device was set"),
                 Err(err) => Response::new(false, err.to_string()),
             }
@@ -232,3 +382,102 @@ impl Executable for SetCurrentInputCommand {
         }
     }
 }
+
+#[async_trait]
+impl Executable for SetLoopCommand {
+    async fn execute(&self) -> Response {
+        let mut audio_player = match get_audio_player().await {
+            Ok(player) => player.lock().await,
+            Err(err) => return Response::new(false, format!("Audio player error: {}", err)),
+        };
+
+        match self.enabled {
+            Some(enabled) => {
+                audio_player.set_loop(enabled, self.id);
+                Response::new(true, format!("Loop was set to {}", enabled))
+            }
+            None => Response::new(false, "Invalid enabled value"),
+        }
+    }
+}
+
+#[async_trait]
+impl Executable for ToggleLoopCommand {
+    async fn execute(&self) -> Response {
+        let mut audio_player = match get_audio_player().await {
+            Ok(player) => player.lock().await,
+            Err(err) => return Response::new(false, format!("Audio player error: {}", err)),
+        };
+        if let Some(id) = self.id {
+            if let Some(track) = audio_player.tracks.get_mut(&id) {
+                track.looped = !track.looped;
+                Response::new(true, format!("Loop was set to {}", track.looped))
+            } else {
+                Response::new(false, "Track not found")
+            }
+        } else {
+            // Toggle all?
+            for track in audio_player.tracks.values_mut() {
+                track.looped = !track.looped;
+            }
+            Response::new(true, "Loop toggled for all tracks")
+        }
+    }
+}
+
+#[async_trait]
+impl Executable for GetDaemonVersionCommand {
+    async fn execute(&self) -> Response {
+        Response::new(true, env!("CARGO_PKG_VERSION"))
+    }
+}
+
+#[async_trait]
+impl Executable for GetFullStateCommand {
+    async fn execute(&self) -> Response {
+        let (input_devices, _output_devices) = match get_all_devices().await {
+            Ok(devices) => devices,
+            Err(err) => return Response::new(false, format!("Failed to get devices: {}", err)),
+        };
+        let mut all_inputs = HashMap::new();
+        let mut current_input_nick = String::new();
+
+        let audio_player = match get_audio_player().await {
+            Ok(player) => player.lock().await,
+            Err(err) => return Response::new(false, format!("Audio player error: {}", err)),
+        };
+        if let Some(current_input_name) = &audio_player.input_device_name {
+            for device in input_devices {
+                if device.name == "pwsp-virtual-mic" {
+                    continue;
+                }
+                if device.name == *current_input_name {
+                    current_input_nick = format!("{} - {}", device.name, device.nick);
+                }
+
+                all_inputs.insert(device.name, device.nick);
+            }
+        } else {
+            for device in input_devices {
+                if device.name == "pwsp-virtual-mic" {
+                    continue;
+                }
+
+                all_inputs.insert(device.name, device.nick);
+            }
+        }
+
+        let full_state = FullState {
+            state: audio_player.get_state(),
+            tracks: audio_player.get_tracks(),
+            volume: audio_player.volume,
+            current_input: current_input_nick,
+            all_inputs,
+        };
+
+        match serde_json::to_string(&full_state) {
+            Ok(json) => Response::new(true, json),
+            Err(err) => Response::new(false, format!("Failed to serialize full state: {}", err)),
+        }
+    }
+}

src/types/config.rs

@@ -1,20 +1,22 @@
 use crate::utils::config::get_config_path;
 use serde::{Deserialize, Serialize};
-use std::{collections::HashSet, error::Error, fs, path::PathBuf};
+use std::{error::Error, fs, path::PathBuf};
 
 #[derive(Default, Clone, Serialize, Deserialize)]
+#[serde(default)]
 pub struct DaemonConfig {
-    pub default_input_id: Option<u32>,
+    pub default_input_name: Option<String>,
     pub default_volume: Option<f32>,
 }
 
 impl DaemonConfig {
     pub fn save_to_file(&self) -> Result<(), Box<dyn Error>> {
         let config_path = get_config_path()?.join("daemon.json");
-        let config_dir = config_path.parent().unwrap();
 
-        if !config_path.exists() {
-            fs::create_dir_all(config_dir)?;
+        if let Some(config_dir) = config_path.parent() {
+            if !config_path.exists() {
+                fs::create_dir_all(config_dir)?;
+            }
         }
 
         let config_json = serde_json::to_string_pretty(self)?;
@@ -25,31 +27,39 @@ impl DaemonConfig {
     pub fn load_from_file() -> Result<DaemonConfig, Box<dyn Error>> {
         let config_path = get_config_path()?.join("daemon.json");
         let bytes = fs::read(config_path)?;
-        Ok(serde_json::from_slice::<DaemonConfig>(&bytes)?)
+        match serde_json::from_slice::<DaemonConfig>(&bytes) {
+            Ok(config) => Ok(config),
+            Err(_) => Ok(DaemonConfig::default()),
+        }
     }
 }
 
 #[derive(Clone, Serialize, Deserialize)]
+#[serde(default)]
 pub struct GuiConfig {
     pub scale_factor: f32,
+    pub left_panel_width: f32,
 
     pub save_volume: bool,
     pub save_input: bool,
     pub save_scale_factor: bool,
+    pub pause_on_exit: bool,
 
-    pub dirs: HashSet<PathBuf>,
+    pub dirs: Vec<PathBuf>,
 }
 
 impl Default for GuiConfig {
     fn default() -> Self {
         GuiConfig {
             scale_factor: 1.0,
+            left_panel_width: 280.0,
 
             save_volume: false,
             save_input: false,
             save_scale_factor: false,
+            pause_on_exit: false,
 
-            dirs: HashSet::default(),
+            dirs: vec![],
         }
     }
 }
@@ -57,10 +67,11 @@ impl Default for GuiConfig {
 impl GuiConfig {
     pub fn save_to_file(&mut self) -> Result<(), Box<dyn Error>> {
         let config_path = get_config_path()?.join("gui.json");
-        let config_dir = config_path.parent().unwrap();
 
-        if !config_path.exists() {
-            fs::create_dir_all(config_dir)?;
+        if let Some(config_dir) = config_path.parent() {
+            if !config_path.exists() {
+                fs::create_dir_all(config_dir)?;
+            }
         }
 
         // Do not save scale factor if user does not want to
@@ -76,6 +87,9 @@ impl GuiConfig {
     pub fn load_from_file() -> Result<GuiConfig, Box<dyn Error>> {
         let config_path = get_config_path()?.join("gui.json");
         let bytes = fs::read(config_path)?;
-        Ok(serde_json::from_slice::<GuiConfig>(&bytes)?)
+        match serde_json::from_slice::<GuiConfig>(&bytes) {
+            Ok(config) => Ok(config),
+            Err(_) => Ok(GuiConfig::default()),
+        }
     }
 }

src/types/gui.rs

@@ -1,39 +1,61 @@
-use crate::types::audio_player::PlayerState;
+use crate::types::audio_player::{PlayerState, TrackInfo};
+
+use egui::Id;
+
 use std::{
     collections::{HashMap, HashSet},
     path::PathBuf,
+    time::Instant,
 };
 
 #[derive(Default, Debug)]
-pub struct AppState {
-    pub search_query: String,
-
+pub struct TrackUiState {
     pub position_slider_value: f32,
     pub volume_slider_value: f32,
 
     pub position_dragged: bool,
     pub volume_dragged: bool,
 
+    pub ignore_position_update_until: Option<Instant>,
+    pub ignore_volume_update_until: Option<Instant>,
+}
+
+#[derive(Default, Debug)]
+pub struct AppState {
+    pub search_query: String,
+
+    pub track_ui_states: HashMap<u32, TrackUiState>,
+
     pub show_settings: bool,
+    pub volume_dragged: bool,
+    pub force_focus_search: bool,
+
+    pub volume_slider_value: f32,
+
+    pub search_field_id: Option<Id>,
+
+    pub ignore_volume_update_until: Option<Instant>,
 
     pub current_dir: Option<PathBuf>,
-    pub dirs: HashSet<PathBuf>,
+    pub dirs: Vec<PathBuf>,
+    pub dirs_to_remove: HashSet<PathBuf>,
+
+    pub selected_file: Option<PathBuf>,
+    pub files: HashSet<PathBuf>,
 }
 
 #[derive(Default, Debug, Clone)]
 pub struct AudioPlayerState {
     pub state: PlayerState,
     pub new_state: Option<PlayerState>,
-    pub current_file_path: PathBuf,
 
-    pub is_paused: bool,
+    pub tracks: Vec<TrackInfo>,
 
-    pub volume: f32,
-    pub new_volume: Option<f32>,
-    pub position: f32,
-    pub new_position: Option<f32>,
-    pub duration: f32,
+    pub volume: f32, // Master volume
 
-    pub current_input: u32,
-    pub all_inputs: HashMap<u32, String>,
+    pub current_input: String,
+    pub all_inputs: HashMap<String, String>,
+    pub all_inputs_sorted: Vec<(String, String)>,
+
+    pub is_daemon_running: bool,
 }

src/types/socket.rs

@@ -24,44 +24,100 @@ impl Request {
         Request::new("ping", vec![])
     }
 
-    pub fn pause() -> Self {
-        Request::new("pause", vec![])
+    pub fn kill() -> Self {
+        Request::new("kill", vec![])
     }
 
-    pub fn resume() -> Self {
-        Request::new("resume", vec![])
+    pub fn pause(id: Option<u32>) -> Self {
+        let mut args = vec![];
+        let id_str;
+        if let Some(id) = id {
+            id_str = id.to_string();
+            args.push(("id", id_str.as_str()));
+        }
+        Request::new("pause", args)
     }
 
-    pub fn stop() -> Self {
-        Request::new("stop", vec![])
+    pub fn resume(id: Option<u32>) -> Self {
+        let mut args = vec![];
+        let id_str;
+        if let Some(id) = id {
+            id_str = id.to_string();
+            args.push(("id", id_str.as_str()));
+        }
+        Request::new("resume", args)
     }
 
-    pub fn play(file_path: &str) -> Self {
-        Request::new("play", vec![("file_path", file_path)])
+    pub fn toggle_pause(id: Option<u32>) -> Self {
+        let mut args = vec![];
+        let id_str;
+        if let Some(id) = id {
+            id_str = id.to_string();
+            args.push(("id", id_str.as_str()));
+        }
+        Request::new("toggle_pause", args)
+    }
+
+    pub fn stop(id: Option<u32>) -> Self {
+        let mut args = vec![];
+        let id_str;
+        if let Some(id) = id {
+            id_str = id.to_string();
+            args.push(("id", id_str.as_str()));
+        }
+        Request::new("stop", args)
+    }
+
+    pub fn play(file_path: &str, concurrent: bool) -> Self {
+        Request::new(
+            "play",
+            vec![
+                ("file_path", file_path),
+                ("concurrent", &concurrent.to_string()),
+            ],
+        )
     }
 
     pub fn get_is_paused() -> Self {
         Request::new("is_paused", vec![])
     }
 
-    pub fn get_volume() -> Self {
-        Request::new("get_volume", vec![])
+    pub fn get_volume(id: Option<u32>) -> Self {
+        let mut args = vec![];
+        let id_str;
+        if let Some(id) = id {
+            id_str = id.to_string();
+            args.push(("id", id_str.as_str()));
+        }
+        Request::new("get_volume", args)
     }
 
-    pub fn get_position() -> Self {
-        Request::new("get_position", vec![])
+    pub fn get_position(id: Option<u32>) -> Self {
+        let mut args = vec![];
+        let id_str;
+        if let Some(id) = id {
+            id_str = id.to_string();
+            args.push(("id", id_str.as_str()));
+        }
+        Request::new("get_position", args)
     }
 
-    pub fn get_duration() -> Self {
-        Request::new("get_duration", vec![])
+    pub fn get_duration(id: Option<u32>) -> Self {
+        let mut args = vec![];
+        let id_str;
+        if let Some(id) = id {
+            id_str = id.to_string();
+            args.push(("id", id_str.as_str()));
+        }
+        Request::new("get_duration", args)
     }
 
     pub fn get_state() -> Self {
         Request::new("get_state", vec![])
     }
 
-    pub fn get_current_file_path() -> Self {
-        Request::new("get_current_file_path", vec![])
+    pub fn get_tracks() -> Self {
+        Request::new("get_tracks", vec![])
     }
 
     pub fn get_input() -> Self {
@@ -72,16 +128,50 @@ impl Request {
         Request::new("get_inputs", vec![])
     }
 
-    pub fn set_volume(volume: f32) -> Self {
-        Request::new("set_volume", vec![("volume", &volume.to_string())])
+    pub fn set_volume(volume: f32, id: Option<u32>) -> Self {
+        let mut args = vec![("volume".to_string(), volume.to_string())];
+        if let Some(id) = id {
+            args.push(("id".to_string(), id.to_string()));
+        }
+        Request::new("set_volume".to_string(), args)
     }
 
-    pub fn seek(position: f32) -> Self {
-        Request::new("seek", vec![("position", &position.to_string())])
+    pub fn seek(position: f32, id: Option<u32>) -> Self {
+        let mut args = vec![("position".to_string(), position.to_string())];
+        if let Some(id) = id {
+            args.push(("id".to_string(), id.to_string()));
+        }
+        Request::new("seek".to_string(), args)
     }
 
-    pub fn set_input(id: u32) -> Self {
-        Request::new("set_input", vec![("input_id", &id.to_string())])
+    pub fn set_input(name: &str) -> Self {
+        Request::new("set_input", vec![("input_name", name)])
+    }
+
+    pub fn set_loop(enabled: &str, id: Option<u32>) -> Self {
+        let mut args = vec![("enabled".to_string(), enabled.to_string())];
+        if let Some(id) = id {
+            args.push(("id".to_string(), id.to_string()));
+        }
+        Request::new("set_loop".to_string(), args)
+    }
+
+    pub fn toggle_loop(id: Option<u32>) -> Self {
+        let mut args = vec![];
+        let id_str;
+        if let Some(id) = id {
+            id_str = id.to_string();
+            args.push(("id", id_str.as_str()));
+        }
+        Request::new("toggle_loop", args)
+    }
+
+    pub fn get_daemon_version() -> Self {
+        Request::new("get_daemon_version", vec![])
+    }
+
+    pub fn get_full_state() -> Self {
+        Request::new("get_full_state", vec![])
     }
 }
 

src/utils/commands.rs

@@ -3,14 +3,18 @@ use crate::types::{commands::*, socket::Request};
 use std::path::PathBuf;
 
 pub fn parse_command(request: &Request) -> Option<Box<dyn Executable + Send>> {
+    let id = request.args.get("id").and_then(|s| s.parse::<u32>().ok());
+
     match request.name.as_str() {
         "ping" => Some(Box::new(PingCommand {})),
-        "pause" => Some(Box::new(PauseCommand {})),
-        "resume" => Some(Box::new(ResumeCommand {})),
-        "stop" => Some(Box::new(StopCommand {})),
+        "kill" => Some(Box::new(KillCommand {})),
+        "pause" => Some(Box::new(PauseCommand { id })),
+        "resume" => Some(Box::new(ResumeCommand { id })),
+        "toggle_pause" => Some(Box::new(TogglePauseCommand { id })),
+        "stop" => Some(Box::new(StopCommand { id })),
         "is_paused" => Some(Box::new(IsPausedCommand {})),
         "get_state" => Some(Box::new(GetStateCommand {})),
-        "get_volume" => Some(Box::new(GetVolumeCommand {})),
+        "get_volume" => Some(Box::new(GetVolumeCommand { id })),
         "set_volume" => {
             let volume = request
                 .args
@@ -18,9 +22,9 @@ pub fn parse_command(request: &Request) -> Option<Box<dyn Executable + Send>> {
                 .unwrap_or(&String::new())
                 .parse::<f32>()
                 .ok();
-            Some(Box::new(SetVolumeCommand { volume }))
+            Some(Box::new(SetVolumeCommand { volume, id }))
         }
-        "get_position" => Some(Box::new(GetPositionCommand {})),
+        "get_position" => Some(Box::new(GetPositionCommand { id })),
         "seek" => {
             let position = request
                 .args
@@ -28,9 +32,9 @@ pub fn parse_command(request: &Request) -> Option<Box<dyn Executable + Send>> {
                 .unwrap_or(&String::new())
                 .parse::<f32>()
                 .ok();
-            Some(Box::new(SeekCommand { position }))
+            Some(Box::new(SeekCommand { position, id }))
         }
-        "get_duration" => Some(Box::new(GetDurationCommand {})),
+        "get_duration" => Some(Box::new(GetDurationCommand { id })),
         "play" => {
             let file_path = request
                 .args
@@ -38,20 +42,36 @@ pub fn parse_command(request: &Request) -> Option<Box<dyn Executable + Send>> {
                 .unwrap_or(&String::new())
                 .parse::<PathBuf>()
                 .ok();
-            Some(Box::new(PlayCommand { file_path }))
+            let concurrent = request
+                .args
+                .get("concurrent")
+                .unwrap_or(&String::new())
+                .parse::<bool>()
+                .ok();
+            Some(Box::new(PlayCommand {
+                file_path,
+                concurrent,
+            }))
         }
-        "get_current_file_path" => Some(Box::new(GetCurrentFilePathCommand {})),
+        "get_tracks" => Some(Box::new(GetTracksCommand {})),
         "get_input" => Some(Box::new(GetCurrentInputCommand {})),
         "get_inputs" => Some(Box::new(GetAllInputsCommand {})),
         "set_input" => {
-            let id = request
-                .args
-                .get("input_id")
-                .unwrap_or(&String::new())
-                .parse::<u32>()
-                .ok();
-            Some(Box::new(SetCurrentInputCommand { id }))
+            let name = Some(request.args.get("input_name").unwrap_or(&String::new())).cloned();
+            Some(Box::new(SetCurrentInputCommand { name }))
         }
+        "set_loop" => {
+            let enabled = request
+                .args
+                .get("enabled")
+                .unwrap_or(&String::new())
+                .parse::<bool>()
+                .ok();
+            Some(Box::new(SetLoopCommand { enabled, id }))
+        }
+        "toggle_loop" => Some(Box::new(ToggleLoopCommand { id })),
+        "get_daemon_version" => Some(Box::new(GetDaemonVersionCommand {})),
+        "get_full_state" => Some(Box::new(GetFullStateCommand {})),
         _ => None,
     }
 }

src/utils/daemon.rs

@@ -2,11 +2,11 @@ use crate::{
     types::{
         audio_player::AudioPlayer,
         config::DaemonConfig,
-        pipewire::AudioDevice,
         socket::{Request, Response},
     },
-    utils::pipewire::{create_link, get_all_devices},
+    utils::pipewire::{create_link, get_device},
 };
+use std::os::unix::fs::PermissionsExt;
 use std::path::PathBuf;
 use std::{error::Error, fs};
 use tokio::{
@@ -18,11 +18,14 @@ use tokio::{
 
 static AUDIO_PLAYER: OnceCell<Mutex<AudioPlayer>> = OnceCell::const_new();
 
-pub async fn get_audio_player() -> &'static Mutex<AudioPlayer> {
+pub async fn get_audio_player() -> Result<&'static Mutex<AudioPlayer>, String> {
     AUDIO_PLAYER
-        .get_or_init(|| async {
+        .get_or_try_init(|| async {
             println!("Initializing audio player");
-            Mutex::new(AudioPlayer::new().await.unwrap())
+            match AudioPlayer::new().await {
+                Ok(player) => Ok(Mutex::new(player)),
+                Err(err) => Err(err.to_string()),
+            }
         })
         .await
 }
@@ -36,37 +39,22 @@ pub fn get_daemon_config() -> DaemonConfig {
 }
 
 pub async fn link_player_to_virtual_mic() -> Result<(), Box<dyn Error>> {
-    let (input_devices, output_devices) = get_all_devices().await?;
-
-    let mut pwsp_daemon_output: Option<AudioDevice> = None;
-    for output_device in output_devices {
-        if output_device.name == "alsa_playback.pwsp-daemon" {
-            pwsp_daemon_output = Some(output_device);
-            break;
-        }
+    let pwsp_daemon_output;
+    if let Ok(device) = get_device("pwsp-daemon").await {
+        pwsp_daemon_output = device;
+    } else {
+        return Err(
+            "Could not find alsa_playback.pwsp-daemon device, skipping device linking".into(),
+        );
     }
 
-    if pwsp_daemon_output.is_none() {
-        println!("Could not find pwsp-daemon output device, skipping device linking");
-        return Ok(());
+    let pwsp_daemon_input;
+    if let Ok(device) = get_device("pwsp-virtual-mic").await {
+        pwsp_daemon_input = device;
+    } else {
+        return Err("Could not find pwsp-virtual-mic device, skipping device linking".into());
     }
 
-    let mut pwsp_daemon_input: Option<AudioDevice> = None;
-    for input_device in input_devices {
-        if input_device.name == "pwsp-virtual-mic" {
-            pwsp_daemon_input = Some(input_device);
-            break;
-        }
-    }
-
-    if pwsp_daemon_input.is_none() {
-        println!("Could not find pwsp-daemon input device, skipping device linking");
-        return Ok(());
-    }
-
-    let pwsp_daemon_output = pwsp_daemon_output.unwrap();
-    let pwsp_daemon_input = pwsp_daemon_input.unwrap();
-
     let output_fl = pwsp_daemon_output
         .clone()
         .output_fl
@@ -97,6 +85,7 @@ pub fn create_runtime_dir() -> Result<(), Box<dyn Error>> {
     if !runtime_dir.exists() {
         fs::create_dir_all(&runtime_dir)?;
     }
+    fs::set_permissions(&runtime_dir, fs::Permissions::from_mode(0o700))?;
 
     Ok(())
 }
@@ -124,7 +113,7 @@ pub async fn wait_for_daemon() -> Result<(), Box<dyn Error>> {
     Ok(())
 }
 
-pub async fn make_request(request: Request) -> Result<Response, Box<dyn Error>> {
+pub async fn make_request(request: Request) -> Result<Response, Box<dyn Error + Send + Sync>> {
     let socket_path = get_runtime_dir().join("daemon.sock");
     let mut stream = UnixStream::connect(socket_path).await?;
 

src/utils/gui.rs

@@ -1,16 +1,14 @@
 use crate::{
     types::{
-        audio_player::PlayerState,
+        audio_player::FullState,
         config::GuiConfig,
         gui::AudioPlayerState,
         socket::{Request, Response},
     },
-    utils::daemon::{make_request, wait_for_daemon},
+    utils::daemon::{is_daemon_running, make_request},
 };
 use std::{
-    collections::HashMap,
     error::Error,
-    path::PathBuf,
     sync::{Arc, Mutex},
 };
 use tokio::time::{Duration, sleep};
@@ -24,7 +22,17 @@ pub fn get_gui_config() -> GuiConfig {
 }
 
 pub fn make_request_sync(request: Request) -> Result<Response, Box<dyn Error>> {
-    futures::executor::block_on(make_request(request))
+    tokio::task::block_in_place(|| {
+        tokio::runtime::Handle::current()
+            .block_on(make_request(request))
+            .map_err(|e| e as Box<dyn Error>)
+    })
+}
+
+pub fn make_request_async(request: Request) {
+    tokio::spawn(async move {
+        make_request(request).await.ok();
+    });
 }
 
 pub fn format_time_pair(position: f32, duration: f32) -> String {
@@ -40,117 +48,61 @@ pub fn format_time_pair(position: f32, duration: f32) -> String {
 
 pub fn start_app_state_thread(audio_player_state_shared: Arc<Mutex<AudioPlayerState>>) {
     tokio::spawn(async move {
-        let sleep_duration = Duration::from_millis(100);
+        let sleep_duration = Duration::from_secs_f32(1.0 / 60.0);
 
         loop {
-            wait_for_daemon().await.ok();
+            let is_running = is_daemon_running().unwrap_or(false);
 
-            let state_req = Request::get_state();
-            let file_path_req = Request::get_current_file_path();
-            let is_paused_req = Request::get_is_paused();
-            let volume_req = Request::get_volume();
-            let position_req = Request::get_position();
-            let duration_req = Request::get_duration();
-            let current_input_req = Request::get_input();
-            let all_inputs_req = Request::get_inputs();
+            if !is_running {
+                {
+                    let mut guard = audio_player_state_shared
+                        .lock()
+                        .unwrap_or_else(|e| e.into_inner());
+                    guard.is_daemon_running = false;
+                }
+                sleep(Duration::from_millis(500)).await;
+                continue;
+            }
 
-            let state_res = make_request(state_req).await.unwrap_or_default();
-            let file_path_res = make_request(file_path_req).await.unwrap_or_default();
-            let is_paused_res = make_request(is_paused_req).await.unwrap_or_default();
-            let volume_res = make_request(volume_req).await.unwrap_or_default();
-            let position_res = make_request(position_req).await.unwrap_or_default();
-            let duration_res = make_request(duration_req).await.unwrap_or_default();
-            let current_input_res = make_request(current_input_req).await.unwrap_or_default();
-            let all_inputs_res = make_request(all_inputs_req).await.unwrap_or_default();
+            let full_state_req = Request::get_full_state();
+            let full_state_res = make_request(full_state_req).await.unwrap_or_default();
 
-            let state = match state_res.status {
-                true => serde_json::from_str::<PlayerState>(&state_res.message).unwrap(),
-                false => PlayerState::default(),
-            };
+            if full_state_res.status {
+                let full_state: FullState =
+                    serde_json::from_str(&full_state_res.message).unwrap_or_default();
 
-            let file_path = match file_path_res.status {
-                true => PathBuf::from(file_path_res.message),
-                false => PathBuf::new(),
-            };
-            let is_paused = match is_paused_res.status {
-                true => is_paused_res.message == "true",
-                false => false,
-            };
-            let volume = match volume_res.status {
-                true => volume_res.message.parse::<f32>().unwrap(),
-                false => 0.0,
-            };
-            let position = match position_res.status {
-                true => position_res.message.parse::<f32>().unwrap(),
-                false => 0.0,
-            };
-            let duration = match duration_res.status {
-                true => duration_res.message.parse::<f32>().unwrap(),
-                false => 0.0,
-            };
-            let current_input = match current_input_res.status {
-                true => current_input_res
-                    .message
-                    .as_str()
-                    .split(" - ")
-                    .collect::<Vec<&str>>()
-                    .first()
-                    .unwrap()
-                    .to_string()
-                    .parse::<u32>()
-                    .unwrap_or_default(),
-                false => 0,
-            };
-            let all_inputs = match all_inputs_res.status {
-                true => all_inputs_res
-                    .message
-                    .as_str()
-                    .split(';')
-                    .filter_map(|entry| {
-                        let entry = entry.trim();
-                        if entry.is_empty() {
-                            return None;
-                        }
-                        entry.split_once(" - ").and_then(|(k, v)| {
-                            k.trim()
-                                .parse::<u32>()
-                                .ok()
-                                .map(|key| (key, v.trim().to_string()))
-                        })
-                    })
-                    .collect(),
-                false => HashMap::new(),
-            };
-
-            {
-                let mut guard = audio_player_state_shared.lock().unwrap();
+                let mut guard = audio_player_state_shared
+                    .lock()
+                    .unwrap_or_else(|e| e.into_inner());
 
                 guard.state = match guard.new_state.clone() {
                     Some(new_state) => {
                         guard.new_state = None;
                         new_state
                     }
-                    None => state,
+                    None => full_state.state,
                 };
-                guard.current_file_path = file_path;
-                guard.is_paused = is_paused;
-                guard.volume = match guard.new_volume {
-                    Some(new_volume) => {
-                        guard.new_volume = None;
-                        new_volume
-                    }
-                    None => volume,
-                };
-                guard.position = match guard.new_position {
-                    Some(new_position) => {
-                        guard.new_position = None;
-                        new_position
-                    }
-                    None => position,
-                };
-                guard.duration = if duration > 0.0 { duration } else { 1.0 };
-                guard.current_input = current_input;
-                guard.all_inputs = all_inputs;
+                guard.tracks = full_state.tracks;
+                guard.volume = full_state.volume;
+                guard.current_input = full_state
+                    .current_input
+                    .split(" - ")
+                    .next()
+                    .unwrap_or_default()
+                    .to_string();
+
+                if guard.all_inputs != full_state.all_inputs {
+                    guard.all_inputs = full_state.all_inputs;
+                    let mut sorted: Vec<(String, String)> = guard
+                        .all_inputs
+                        .iter()
+                        .map(|(k, v)| (k.clone(), v.clone()))
+                        .collect();
+                    sorted.sort_by(|a, b| a.0.cmp(&b.0));
+                    guard.all_inputs_sorted = sorted;
+                }
+
+                guard.is_daemon_running = true;
             }
 
             sleep(sleep_duration).await;

src/utils/pipewire.rs

@@ -57,17 +57,19 @@ fn parse_global_object(
             };
             // Check if the object is a port
         } else if props.get("port.direction").is_some() {
-            let node_id = props.get("node.id").unwrap().parse::<u32>().unwrap();
-            let port_id = props.get("port.id").unwrap().parse::<u32>().unwrap();
-            let port_name = props.get("port.name").unwrap();
+            if let (Some(node_id), Some(port_id), Some(port_name)) = (
+                props.get("node.id").and_then(|id| id.parse::<u32>().ok()),
+                props.get("port.id").and_then(|id| id.parse::<u32>().ok()),
+                props.get("port.name"),
+            ) {
+                let port = Port {
+                    node_id,
+                    port_id,
+                    name: port_name.to_string(),
+                };
 
-            let port = Port {
-                node_id,
-                port_id,
-                name: port_name.to_string(),
-            };
-
-            return (None, Some(port));
+                return (None, Some(port));
+            }
         }
     }
     (None, None)
@@ -77,6 +79,8 @@ async fn pw_get_global_objects_thread(
     main_sender: mpsc::Sender<(Option<AudioDevice>, Option<Port>)>,
     pw_receiver: pipewire::channel::Receiver<Terminate>,
 ) {
+    pipewire::init();
+
     let main_loop = MainLoopRc::new(None).expect("Failed to initialize pipewire main loop");
 
     // Stop main loop on Terminate message
@@ -149,8 +153,7 @@ pub async fn get_all_devices() -> Result<(Vec<AudioDevice>, Vec<AudioDevice>), B
                 for port in ports {
                     let node_id = port.node_id;
 
-                    if input_devices.contains_key(&node_id) {
-                        let input_device = input_devices.get_mut(&node_id).unwrap();
+                    if let Some(input_device) = input_devices.get_mut(&node_id) {
                         match port.name.as_str() {
                             "input_FL" => input_device.input_fl = Some(port),
                             "input_FR" => input_device.input_fr = Some(port),
@@ -162,10 +165,13 @@ pub async fn get_all_devices() -> Result<(Vec<AudioDevice>, Vec<AudioDevice>), B
                                 input_device.input_fl = Some(port.clone());
                                 input_device.input_fr = Some(port)
                             }
+                            "capture_MONO" => {
+                                input_device.output_fl = Some(port.clone());
+                                input_device.output_fr = Some(port);
+                            }
                             _ => {}
                         }
-                    } else if output_devices.contains_key(&node_id) {
-                        let output_device = output_devices.get_mut(&node_id).unwrap();
+                    } else if let Some(output_device) = output_devices.get_mut(&node_id) {
                         match port.name.as_str() {
                             "input_FL" => output_device.input_fl = Some(port),
                             "input_FR" => output_device.input_fr = Some(port),
@@ -199,23 +205,27 @@ pub async fn get_all_devices() -> Result<(Vec<AudioDevice>, Vec<AudioDevice>), B
     }
 }
 
-pub async fn get_device(node_id: u32) -> Result<AudioDevice, Box<dyn Error>> {
-    let (mut input_devices, output_devices) = get_all_devices().await?;
-    input_devices.extend(output_devices);
+pub async fn get_device(device_name: &str) -> Result<AudioDevice, Box<dyn Error>> {
+    let (input_devices, output_devices) = get_all_devices().await?;
 
-    for device in input_devices {
-        if device.id == node_id {
-            return Ok(device);
-        }
-    }
-
-    Err("Device not found".into())
+    input_devices
+        .into_iter()
+        .chain(output_devices)
+        .find(|device| {
+            device.name == device_name
+                || device.nick == device_name
+                || device.name.contains(device_name)
+                || device.nick.contains(device_name)
+        })
+        .ok_or_else(|| "Device not found".into())
 }
 
 pub fn create_virtual_mic() -> Result<pipewire::channel::Sender<Terminate>, Box<dyn Error>> {
     let (pw_sender, pw_receiver) = pipewire::channel::channel::<Terminate>();
 
     let _pw_thread = thread::spawn(move || {
+        pipewire::init();
+
         let main_loop = MainLoopRc::new(None).expect("Failed to initialize pipewire main loop");
         let context = ContextRc::new(&main_loop, None).expect("Failed to create pipewire context");
         let core = context
@@ -257,6 +267,8 @@ pub fn create_link(
     let (pw_sender, pw_receiver) = pipewire::channel::channel::<Terminate>();
 
     let _pw_thread = thread::spawn(move || {
+        pipewire::init();
+
         let main_loop = MainLoopRc::new(None).expect("Failed to initialize pipewire main loop");
         let context = ContextRc::new(&main_loop, None).expect("Failed to create pipewire context");
         let core = context

tests/perf_play.rs

@@ -0,0 +1,113 @@
+use rodio::{DeviceSinkBuilder, MixerDeviceSink};
+use std::fs;
+use std::path::Path;
+use std::sync::Arc;
+use std::time::Instant;
+use tokio::sync::Mutex;
+
+// A mock of AudioPlayer to isolate the play method's blocking behavior.
+// We only implement the relevant part of the logic that needs optimizing.
+pub struct AudioPlayerMock {
+    pub tracks: std::collections::HashMap<u32, ()>,
+    pub next_id: u32,
+    pub volume: f32,
+}
+
+impl AudioPlayerMock {
+    pub fn new() -> Self {
+        AudioPlayerMock {
+            tracks: std::collections::HashMap::new(),
+            next_id: 1,
+            volume: 1.0,
+        }
+    }
+
+    pub async fn play(
+        &mut self,
+        file_path: &Path,
+        concurrent: bool,
+    ) -> Result<u32, Box<dyn std::error::Error + Send + Sync>> {
+        if !file_path.exists() {
+            return Err(format!("File does not exist: {}", file_path.display()).into());
+        }
+
+        let path_buf = file_path.to_path_buf();
+        let _file = tokio::task::spawn_blocking(move || {
+            // Simulate some blocking work like Decoder::try_from which reads file headers
+            let _f = fs::File::open(&path_buf).unwrap();
+
+            // Emulate the actual time spent reading file and decoding header (which is what Decoder::try_from does)
+            std::thread::sleep(std::time::Duration::from_millis(100)); // Simulate slow disk/decode
+            _f
+        })
+        .await?;
+
+        if !concurrent {
+            self.tracks.clear();
+        }
+
+        let id = self.next_id;
+        self.next_id += 1;
+        self.tracks.insert(id, ());
+
+        Ok(id)
+    }
+}
+
+#[tokio::test(flavor = "multi_thread", worker_threads = 2)]
+async fn test_performance_blocking() {
+    println!("Setting up mock environment...");
+
+    // Create a dummy file to read
+    let test_file = Path::new("test_dummy.wav");
+    fs::write(test_file, "dummy content").unwrap();
+
+    let player = Arc::new(Mutex::new(AudioPlayerMock::new()));
+
+    println!("Starting benchmark for synchronous behavior in async fn...");
+
+    // We launch a background task that measures event loop latency.
+    // If the main tasks block the executor, this task will suffer high latency.
+    let latency_task = tokio::spawn(async {
+        let mut max_latency = std::time::Duration::from_secs(0);
+        for _ in 0..50 {
+            let start = Instant::now();
+            tokio::task::yield_now().await;
+            let elapsed = start.elapsed();
+            if elapsed > max_latency {
+                max_latency = elapsed;
+            }
+            tokio::time::sleep(std::time::Duration::from_millis(5)).await;
+        }
+        max_latency
+    });
+
+    // Launch multiple play operations
+    let mut tasks = vec![];
+    let start_time = Instant::now();
+    for _ in 0..10 {
+        let player_clone = Arc::clone(&player);
+        let file_path = test_file.to_path_buf();
+        tasks.push(tokio::spawn(async move {
+            let mut p = player_clone.lock().await;
+            let _ = p.play(&file_path, true).await;
+        }));
+    }
+
+    // Wait for all tasks to finish
+    for t in tasks {
+        let _ = t.await;
+    }
+    let total_time = start_time.elapsed();
+
+    let max_latency = latency_task.await.unwrap();
+
+    println!("Total execution time: {:?}", total_time);
+    println!(
+        "Max event loop latency (blocking indicator): {:?}",
+        max_latency
+    );
+
+    // Cleanup
+    fs::remove_file(test_file).unwrap();
+}